OK, I'll bite. I have seen three kinds of insulation on the PL 259's; brown, white and clear. Is there a performance difference? Is one considered better? 73, Bruce K1MY
This is a question asked of me by one of our club members who is not subscribed. Reply to me and I'll pass it on. 73, Bruce K1MY Bruce It's 150' of R55. I'm in the process of plumbing before installi
Thanks to all who took the time to respond to this question. I will pass all of your reponses on to Preston and will also introduce him to the reflector. You may see him on here in the future. Again,
My only advice would be don't move in next door to an HF ham but I guess that doesn't apply here. Seriously you better coordinate when you're on or you will have trouble. 73 Bruce K1MY learner!!....n
Yes it is neat and easy to use but remember that if you are going to make your own you'll have to buy some yellow paint also. 73, Bruce K1MY Weather Stations", and lot's more. Call Toll Free, 1-800-3
Put in twice as many outlets as you think you need for both 110 and 220 and you will never be sorry. I have 2 outlets on every stud, one on each side and still ran out. I also had a sub panel install
This antenna will go on a 70 foot tower. It is the prime WARC beam for my station and is a backup for my large tribander that is at 100 feet. I do not operate on 6 meters. I have narrowed the choice
I all ready have KT36XA's at 100 feet, 75 feet and 50 feet and there is no 3 element short boom antenna that is going to beat all of those. I agree Pete. This is a back up tribander in case the rotor
My recent post asking for recommendations between a log and a SteppIR that claims 1:1 SWR across the band has yielded some interesting responses but has also raised a question in my mind. "Why is SWR
For the Rohn recommendation, see http://www.rohnnet.com/rohnnet2001/catalog/html/gtowers.html and get your windspeed from championradio.com It's typically 80% of the tower height. 73, Bruce K1MY my f
I need to put up a temporary antenna for 80 meters for the CQWW contest. Which of the following will be a better DX performer? 1/2 wave dipole with both ends at 95 feet broadside to JA sloping 1/2 wa
I just compared the 3 element SteppIR to the Tennadyne T6 and other than the fact that the SteppIR costs over $1000 and the T6 is about $500 I cannot find a significant difference. I do not operate 6
DO NOT do this !!! Eventually you will wear through the tower leg. Danger. 73, Bruce K1MY comes simple available an http://www.mscomputer.com additional 5 percent off
Hi Mike, Re-read my e mail, I said " Eventually you will wear THROUGH the tower leg." That was in response to his thought that he might mount to ONE leg, not two. OK? 73, Bruce antennas Danger. 45. h
Does anyone have any experience with the ARRL Ham Radio Insurance Plan. According to their home page, they now cover antennas, rotators and towers. 73, Bruce
All of this talk about cutting plate got me thinking about a 20 foot steel thick wall 2" OD antenna mast that I have in the garage. I need to cut it down to two10's. The guy at the hardware store sug
correct url is: http://www.burghardt-amateur.com/Burghardt/Phillystran/phillystran.html You were missing a "d" in the second Burghardt 73, Bruce K1MY use of the tie wrap is black tie wrap around the