Steve, This is how we roll also :-) https://lh6.googleusercontent.com/-ul2wfl94GHI/T-upyFMmz6I/AAAAAAAAAzk/YHHqNBk-CZw/w267-h199-n-k/2012_06_24-10_01_57.jpg K0YR Thomas Rieff 2059 Sundance Lane North
T/T, Working on a 40 Meter 2 element vertical beam for an upcoming trip. Built it last weekend and have it suspended between 2 trees pointed to EU. Seems to be working OK when A/B compared against th
T/T, Been thinking of interlacing a 5 element 10 meter beam on my 3 element 40 meter beam as a tower space saving measure. Normally do not use these bands at the same time. Any thoughts whether this
T/T Any thoughts on how to switch multiple rotors with one set of cabling. The towers I wish to switch are 500 feet from the cabin. Or is there a better way of wireless remoting??? Tom, K0YR K0YR Tho
What is a good source for some 1 1/4" saddle clamps??? In the process of building something that will be secured to a Rohn 45G tower. Your help is appreciated. Tom, K0YR K0YR Thomas Rieff 2059 Sundan
TT, I inherited a RCS4 Antenna Switch from an estate. When first installed it generated noise when using the 1,2 or 3 switch positions. The default is #4. Did some Google'ing and found discussion abo
T/T, This RCS4 has a built in power supply. No wall wort. When switching unit is brought in to the bench, there is no noise, only when placed at the tower. Noise goes away when power is off or in the
Anyone have any ideas on upgrades for the HyGain 3 element Discoverer Antenna??? Are there any antenna models out there to start from??? Would like to improve the existing linear loading concept. Tom
T/T, Does anyone have the rotor manual for a 1022 Tic-Ring? Tom, K0YR -- K0YR Thomas Rieff 2059 Sundance Lane North Mankato, MN 56003 _______________________________________________ _________________
Tower Talk... Thank You to all that responded... The closest manual to what I have is the 1122E. Have most of it put together, next step is place on the tower. I appreciate everyones efforts in helpi
Jon, I am good for now thanks for thinking of me :-) Tom, K0YR Tom, Just found mine while cleaning out a shed. If you still need, let me know and Ill scan in and send pdf. 73/Jon Jon P. Zaimes, AA1K
Any new/old information out there on building CATV Hardline Connectors. In the past I have used CATV pin connectors with a PL259 barrel, a double female connector. What I am looking for is a source f
Recently, had to replace one of my T2X Tailtwister for issues with the brake. It seems to not have complete extension unless you pull it out...as compared to some others that are spring loaded, but n
In need of some Eupen NF50V78N1 connectors. Does anyone know of a source??? And/or equivalent? Tom _______________________________________________ _______________________________________________ Towe