TT's: i have a Ta-40-kr and i want to modify to be use for 30m, i read there in the mosley web page show a TA-30-KR, for that reason i think are similar but just a few less turns of diference. I will
TT's: i want to put on the air the klm 40m-2 antenna that i get like 7years ago, i never use it , i get from a friend in los angeles to another friend here in Mexico but at the end i finish with the
TT's: i intall my tb6em in one of my tower just to check swr because the first test was not very confortable, show the swr in the high part or up the ham band of 15 and 20, the 10, is around 28.6 for
TT's: after several test and diferentes changes using the original telrex balun, i remove it, and my swr is very good, the best i can get in all the bands using the original balun was 1.5 flat across
Kirk: be more specific in this little details: -antenna type to put on the mast -site to install, house, beach, mountain top , around trees ?? -budget to use ? rope , steel wire, depending of what is
Kirk: If you have the mast to be used to install a wi-fi, a single one, the first thing is to have a good base where you can turn or twist a few degrees to get the maximun signal to your w-link, mayb
TT's: I will like to get info to put my station that is 11.4 miles from my qth, i have DLS in one side and the other a very good WIFI connection with a valid IP, i have in the station 1 FT 1000 , 100
Bob: Order some books from antennex.com, there are 2 from Mr. Cebik. good luck. my antenna http://w6trw.com/Articles/article_submissions.htm want to do this right the first time, and get the best rea
Keith: April QST show a remote ant switch, take a lot at the relays Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. __________________
Felipe: here is the link to the antenna desing that i have in use, i'm really very happy with that, also to understand more abouth the Cubical Quad i buy the books from Cebick i get from the Antennex
hi TT's: i need an advice , i want to give more strength to one tower base , is a 1 inch tick and 3 x 4 ft , i will change an old tower to install a new us tower 455 with this base welded to the orig
Juha: there are other options for antenna analizers, you can check the QST may 2005, there you can find the diferences in all the comercial brands . for my point of view , if you don't need the UHF ,
here is the url again or just use the number in the search area. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5775397320 Nice set up _______________________________________________ See: http://
Dale: Here the manual and some specs in the 50MHP , maybe this work . http://www.thiecom.de/ftp/hygain/HG-37SS.pdf good luck XE2K On 29 Jun 2005 08:26 PDT you wrote: _________________________________
HI TT's" i will wait to see a photo of this beutiful 80m Beam with 3 inches of white snow load over all that big pipes . i hope survive several winters. two Weather Stations", and lot's more. Call To
Jim: you can play a little with the arrl antenna book software YA in the taper for the elements , maybe is a rugged version , is my idea, maybe work maybe not the best , but can be a solution good lu
Jim: i check the radioworks catalog and say that the kevlar-dacron 1/8 is for 770 pounds max and 150 working load the 7700 number is nice but not correct _____________________________________________
HI TT's" I found here locally (Mexicali) this tower legs in the yard of one of the biggest metal sellers, one of the owner say he have more in other city near here, to be sure i want to id the parts
Tom: the LMR 400 is the best coax to install PL-259, not the flexible , that is a little problematic for the soft jacket. to install a pl 259 i just cut 3/4 inch jacket-braid-foil-insulator leaving o
Dick: to make the things easy: use the UHF connectors silver plated, this ones take very easy the Solder. N you can use the 2 pieces uhf style connector, both types of connectors you can get in HRO a