Yes, and I still have one on my Hygain crank up. Exactly right. The gear welded onto the motor shaft on mine stripped, so I just moved the entire motor assembly to the left about 1/2 inch so the gea
I have the same tower and same situation. I have not determined the exact amount of lean, ie dropping a plumb bob from the top, etc. I also used the base dimensions in the instruction manual, and the
Hi all, I found this to be an excellent source of cables for crank up towers and accessories. http://www.specialtyassembly.com 73 Buddy WB4M _______________________________________________ __________
A question for those who have replaced cables in a Hygain HG52SS crank up tower. On the 20.5 ft cable connecting sections 2 and 3, what type of end fitting is used? Same as the thimble/swaged end as
Wayne, Bottom line is no matter what you put up, you're gonna love it, hi. I'd just prefer something that worked on 12 and 17 meters along with 10/15/20. In my situation, I am restricted to 9.6 sq ft
Jim, I'm interested, especially the remote up/down switch. email me off-list with details,] Buddy WB4M I believe that a standard motor can be used, there was a small spur gear brazed to the motor sha
Additionally, will an Alfa-spid RAU, the newer smaller version, fit inside a Hygain 52ft crank up? 73 Buddy WB4M Is it possible to thread an Alfaspid RAK-1 though the zigzag weave of either a Rohn45G
I looked at those a few months ago and I would not use them even if they do meet requirements. I agree with N0TT, they would probably not last long in the WX. 73 Buddy WB4M I'm in the process of refu