Paul, Check with Cushcraft. As I recall, three years ago, I bought a set for my A3W and another set for my A4. 73 Don K5AQ _______________________________________________ ____________________________
I second Dick's suggestion. Easy to test them after installation by shorting the far end and checking continuity. Don't ask how I know!! 73 Don K5AQ _______________________________________________ __
Andre, See if you can include it in or add as a rider to your Homeowner's Insurance policy. 73 Don K5AQ _______________________________________________ _______________________________________________
So have all of mine over the years. 73 Don K5AQ _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://
If I recall correctly, tall buildings in earthquake zones are dampened to prevent destructive oscillations. Been in several earthquakes in Japan and Taiwan and the undampened buildings sway enough to
mea culpa You are correct. Don K5AQ _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contes
Was a long time ago, but I took my R5 vertical plus other tubing to Estonia in a golf bag cover. No questions asked at any point. The U.S. customs man asked me on my return if I had a good game. 73 D
Kevin, The ARRL Antenna Book has a 2el 40M Yagi with direct feed. Check out any late edition(mine is the 17th). 73 Don K5AQ _______________________________________________ ___________________________
Mickey, The 354 and 354HD have different dimensions. Not sure about the HM. Check the TashTower web site. It has the information you want, I believe. 73 Don K5AQ _____________________________________
I need a set of three spacers which raise the rotor plate to allow the Tail Twister to turn properly inside the top section of my LM354. They are basically each a short piece of angle stock with a pi
Barrie, I changed out the cables on my LM354 while it was retracted. No big problem. Got the replacement cables from Karl Tashjian. 73 Don K5AQ _______________________________________________ _______
I've ordered a couple of sets of trap covers from MFJ for my A4S and A3WS in the last six months and had no trouble. Service was courteous and fast. 73 Don K5AQ ______________________________________
I called the Cushcraft parts number 662-323-5803. Both clerks I worked with were helpful and friendly. Got the parts all in reasonable time. YMMV 73 Don K5AQ _________________________________________
It is the Model 731, a tunable notch filter. 73 Don K5AQ _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.co
Gregg, I second N0TT's suggestion. I cement a cap on the business end. It has a small hole drilled in it. Put a PVC to hose adapter on the other end and drill away. Have done this in a large church p
Dave, I used a telephone pole to support a 20M 3 3element beam for several years. I used a large angle iron(don't remenber the size since it has been over 30 years!!) lag bolted to the pole and shimm
Jeff, While I was on an overseas trip years ago, my shepherd/husky mix half-grown puppy ate parts of my coax and rotor cable. Must have been tasty to him!! 73 Don K5AQ _______________________________
Looking for a control box as a replacement for my Ameritron RCS-8V. Remote unit OK. Got one laying around not being used? (Using this on my LM354 tower so related to Tower Talk!!) Don K5AQ __________
Dan, RadShak used to sell 5v Zeners. Might check that out. 73 Don K5AQ _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk