- 1. [TowerTalk] Splicing together 7/8" Heliax (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Tue, 2 Sep 1997 15:35:22 -0700
- This I've gotta see!! On second thought. . . . ;) -- Dick Flanagan W6OLD CFII Minden, Nevada Visit http://www.delphi.com/electronic/ -- FAQ on WWW: http://www.contesting.com/towertalkfaq.html Submiss
- /archives//html/Towertalk/1997-09/msg00053.html (8,353 bytes)
- 2. [TowerTalk] Size help (sq feet) (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Fri, 1 Aug 1997 07:05:46 -0700
- I, too, have looked for sq ft measurements for some of these antennas with no success. I would like to find the sq ft measurements of both a TH7 and TH11 if anyone has them handy. Thanks! 73, Dick --
- /archives//html/Towertalk/1997-08/msg00005.html (8,253 bytes)
- 3. [TowerTalk] Coax breakin? (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Sun, 3 Aug 1997 20:48:39 -0700
- To: <towertalk@contesting.com> April Fools, folks! :) -- Dick Flanagan W6OLD CFII Minden, Nevada Visit http://www.delphi.com/electronic/ -- FAQ on WWW: http://www.contesting.com/towertalkfaq.html Sub
- /archives//html/Towertalk/1997-08/msg00066.html (8,454 bytes)
- 4. [TowerTalk] US Tower TX489MDPL Coax Sidearm Question (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Sun, 3 Aug 1997 22:53:39 -0700
- OK, yet another =very= basic question: is the coax supposed to hang loosly through the sidearms so the entire weight of the coax is born at the top-most attach point or is the coax supposed to be sec
- /archives//html/Towertalk/1997-08/msg00071.html (8,549 bytes)
- 5. [TowerTalk] Lightning strikes! (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Tue, 5 Aug 1997 10:21:22 -0700
- Is this a nationwide *requirement* or just good/standard practice? My telephone entrance/ground is on the opposite side of the house from my power utility entrance ground--fully 70 feet away. I think
- /archives//html/Towertalk/1997-08/msg00185.html (7,864 bytes)
- 6. [TowerTalk] Kellems Grips---All You Ever Wanted....... (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Thu, 7 Aug 1997 08:38:45 -0700
- Hi, Larry, I won't reproduce your very excellent article on Kellem grips here, even though the information probably warrants it, but I do have a few questions. Are Kellem grips designed for just one
- /archives//html/Towertalk/1997-08/msg00267.html (8,394 bytes)
- 7. [TowerTalk] Speaking of S units (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Thu, 7 Aug 1997 14:18:47 -0700
- The newbies are already being confused because the General Class question pool contains the One-S-Unit-Equals-Four-Times rule in lots of places. There are lots of inconsistencies and ambiguities in
- /archives//html/Towertalk/1997-08/msg00277.html (8,930 bytes)
- 8. [TowerTalk] Equalizer plates - a PC conspiracy? (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Fri, 8 Aug 1997 09:28:15 -0700
- It would seem to me that the rotational force applied to the smaller guy would be far less than the direct force applied to the anchor. I am obviously missing something somewhere. 73, Dick -- Dick F
- /archives//html/Towertalk/1997-08/msg00320.html (8,136 bytes)
- 9. [TowerTalk] Equalizer plates - a PC conspiracy? (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Fri, 8 Aug 1997 09:54:02 -0700
- It would seem to me that the purpose of the plate is not to put equal forces on the guy wires, but to equalize the directional forces applied to the anchor. Join the (large) club. I learn something
- /archives//html/Towertalk/1997-08/msg00322.html (8,121 bytes)
- 10. [TowerTalk] Remote Coax Switches (Summary) (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Wed, 13 Aug 1997 19:03:10 -0700
- I recently asked the Reflector's opinion on remote coax switches. I haven't posted a summary before now because I needed to wait for some information to arrive by snail mail. The interesting thing wa
- /archives//html/Towertalk/1997-08/msg00454.html (10,835 bytes)
- 11. [TowerTalk] Re: MORE on: Heat Shrink (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Sun, 17 Aug 1997 11:03:52 -0700
- Thanks, Ed, but enough begging of the question! :) What is the TT concensus regarding the use of heat shrink tubing to waterproof outdoor coax connectors/splices? And...if that isn't enough, has anyo
- /archives//html/Towertalk/1997-08/msg00507.html (7,741 bytes)
- 12. [TowerTalk] noise (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Mon, 25 Aug 1997 21:21:21 -0700
- Shielded distributor caps?! Ooooh, I would love to find one of those! Where would I look? 73, Dick -- Dick Flanagan W6OLD CFII Minden, Nevada Visit http://www.delphi.com/electronic/ -- FAQ on WWW: h
- /archives//html/Towertalk/1997-08/msg00709.html (8,282 bytes)
- 13. [TowerTalk] Coax Jumpers (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Tue, 26 Aug 1997 09:19:44 -0700
- A week or so ago there was a short thread on problems with buying pre-made coax jumpers and there were several comments on having good luck with one particular firm. Of course, at the time I didn't h
- /archives//html/Towertalk/1997-08/msg00726.html (7,232 bytes)
- 14. [TowerTalk] noise (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Tue, 26 Aug 1997 09:42:58 -0700
- Well, I'm not the guy with the noisy Honda DX. I'm just the one who wanted a shielded distributor cap for my 86 Ford, but I'll be sure to share whatever solutions I might find. Thanks for your help.
- /archives//html/Towertalk/1997-08/msg00729.html (8,904 bytes)
- 15. [TowerTalk] Pre-made jumper cables (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Tue, 26 Aug 1997 16:02:54 -0700
- Thanks very much, Dave. Yes, several people have responded that the RF Connection in Maryland is the place to go for the cables. Thanks, again. . . . 73, Dick -- Dick Flanagan W6OLD CFII Minden, Neva
- /archives//html/Towertalk/1997-08/msg00743.html (7,729 bytes)
- 16. [TowerTalk] Nye Phone Number (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Sat, 30 Aug 1997 07:54:27 -0700
- I checked their web site http://www.skyport.com/rogue-press/nye1.htm, but the only way I could see to contact them was via their e-mail address NyeViking@POBoxes.com. Good luck. 73, Dick -- Dick Flan
- /archives//html/Towertalk/1997-08/msg00814.html (7,389 bytes)
- 17. [TowerTalk] Stacking Supplement (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Sat, 30 Aug 1997 08:08:21 -0700
- Pat Mulreany, WX7M, here in western Nevada, took a different approach. He assembled a 16-element 20-meter yagi on a 280-foot boom from which he calculates 19 dB forward gain (I don't know whether it
- /archives//html/Towertalk/1997-08/msg00815.html (7,944 bytes)
- 18. [TowerTalk] Interaction between TH11 and 402CD (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Sun, 31 Aug 1997 09:11:28 -0700
- Any thoughts on a possible 17M interaction between a 40-2CD stacked only ten feet above a TH-11DXS? 73, Dick -- Dick Flanagan W6OLD CFII Minden, Nevada Visit http://www.delphi.com/electronic/ -- FAQ
- /archives//html/Towertalk/1997-08/msg00843.html (6,943 bytes)
- 19. [TowerTalk] Grounding your tower and (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Fri, 11 Jul 1997 09:35:23 -0700
- I live in lightning country and my tower ground field uses over 50 ground rods in radials interconnected with 1.5" copper strap. 73, Dick -- Dick Flanagan W6OLD CFII Minden, Nevada Visit http://www.
- /archives//html/Towertalk/1997-07/msg00404.html (7,922 bytes)
- 20. [TowerTalk] "Ground Crew" @ tower installation (score: 1)
- Author: dick@merlin.libelle.com (Dick Flanagan)
- Date: Sun, 13 Jul 1997 10:27:10 -0700
- I hope my wife (KK7AA) doesn't read that or she won't let me help her with our new tower! ;) 73, Dick -- Dick Flanagan W6OLD CFII Minden, Nevada Visit http://www.delphi.com/electronic/ -- FAQ on WWW
- /archives//html/Towertalk/1997-07/msg00459.html (7,394 bytes)
This search system is powered by
Namazu