Well, I removed the keepers the day I received the 6-pak, not 2 weeks ago when I had a problem with one relay. Jay told me to remove the keepers and I told him that I did the first day I have the 6-p
This always happens, the vendor claims that his product is great. WX0B blue boxes are good and are many thousands all around the world. But will be good to know exactly how to install them. If the ma
Hello, HNY for all!... I have a delta loop for 160 mts pointing at 45 degrees (Europe). I open the top to fit in my 110 feets tower. Itīs 167 mts long (548 feets). The error is minimal because I meas
Hello, I am looking for dimensions for a 3 elements wire yagi for 80 mts CW. Will be installed temporarily for ARRL contest, then will take it down If someone use one and have the data will be much a
Hello Stu, I have delta loops for80 and I notice that work better for DX if I feed in an angle, for vertical polarization. Itīs not exactly at 1/4wl since when I tie the rope the wire go trough the i
Hello Bill, I have a 108 ft tower and have a 160 mts delta loop from top of the tower. You can do a delta loop where the sides are shorter than the bottom, as described in ON4UN book 4th edition page
Hello, I will order a snap on beads to add in the keyboard, microfone, mousse, interfaces cables. I think the 31 material https://www.amidoncorp.com/items/6 will be OK, but not sure about the dimensi
Hello, Thanks very much to all for the information. Will se in this other customers. Just did a google and found Amidon. I want to have some of them in the shack. Fortunately all is OK in my shack, n
Well, I also need toroids for my baluns and beverage transformers. Thanks to all the people that help me with this!... 73, Jorge CX6VM De: K7LXC@aol.com [mailto:K7LXC@aol.com] Enviado el: Miércoles,
Hello Steve, Sorry, I know my English is not very good, but trying to write as less as possible to be clear, I talked about keyboars and mousse, but of course my idea is to bring as much as possible
Hello, Where I can buy 60 ft of Phillystran for a boom support? I tried an TexasTower but they are incredible!, they donīt accept export orders. And didnīt accept my order to be shipped to a US addre
TexasTower do not export, and they didin`t want to take my order to be shipped to a US address, they are really bad to deal. But nice to know arraysolutions is a distributor, i bought many thinks wit
Thanks to all for the help. Both ArraySolutions and The RF Connection sell Phillystran as I can see in they websites Thanks! 73, Jorge CX6VM --Mensaje original-- De: Dubovsky, George [mailto:George.D
Hello, While waiting for an answer from Hy-Gain asking for a kit to upgrade a TH7 to a TH11 Dou you know if thereīs a kit to do this upgrade? Someone did this upgrade? Thanks! 73, Jorge CX6VM _______
Hello, I want to know about the best height for a pair of 40-2CD in stack in a new tower. Wich is the best height of the antenna for best performance and wich is the distance between two 40-2CD for b
Hello, I was searching about stacking system. I know about the WX0B stackmatch, but also I found a Comtek system But also play my attention the 3 antennas stack system. They have a more complicated s
Is there any diagram of the mods in the RCS8 to know how is the modification? Hope I can use less than 5 monobanders in the stack! :-) 73, Jorge CX6VM --Mensaje original-- De: towertalk-bounces@conte
Thanks for the info Joe If someone have a pdf file of this article is well appreciated. Thanks, Jorge CX6VM --Mensaje original-- De: towertalk-bounces@contesting.com [mailto:towertalk-bounces@contest
Hello, I need some parts for my old 40-2CD. A strong wind reach it. Now the director looks like an inverted V ..:-) . It works, but next wind I donīt know, this section of aluminum I need are very fr
Thanks John, I sent an email to MFJ, hope any answer, but seems will need to wait some weeks! 73, Jorge CX6VM --Mensaje original-- De: towertalk-bounces@contesting.com [mailto:towertalk-bounces@conte