Moving and down sizing. I have several prop pitch units and selsyns and telrex control box for sale. Wonder what they are worth? I have pictures available. Bill / K8VP _______________________________
I have been reading the thread on tower bases and find it very interesting. I am about to put up a HDX555 tower and the base requirements are 5x5x6. I have a large bolder that my loader will not lift
I just took down two Universal Towers this past week and I am finding the 3/8 bolts are almost completely rusted through in the center of the bolt.. Both of these towers have been up about 10 years.
Dan, This is from US Tower information sheet. From US TOWER WARRANTY AND WARRANTY RESTRICTIONS - US Tower recommends that the Hy-Gain/Telex T2X rotator not be used in our TX-series Towers. US Tower/U
Any one have any suggestions of a lasting lubricant for the winch cables on telescoping towers. On our farm we normally use a oily rag and run it along the cable but wonder if anyone has any other su
Wonder if anyone can help me out on instructions for a old Hy Gain hy tower?? I can't find mine. I want to put this up for 40 and 80. Bill/K8VP _______________________________________________ See: ht
Thanks for all those that posted the Hy-Gain website. I down loaded the manual but did not print it. I didn't realize there was 36 pages. All I remember having was a few pages. Again Thanks and now I
Looking for tips on centering the rotor pot on a Yaesu G2800 rotor. This is the 500 ohm pot that is run by the little gear in the gear box. Bill/K8VP _______________________________________________ S
Looking for used Butternut 80/40 vertical to put up for winter. I have Hy-tower to put up but have more grading to do at new home and do not want put that up until next spring. Anyone have one reason
I just went through that with the bulkhead. I ended up taking one of the panels out of my basement window and replace the vinyl window frame with a frame made up from treated wood with a 1/8 inch alu
Thanks to all those that responded to my query on ground rod and the feed through protection. It is great to get a different perspective that you may not be thinking about. Bill/K8VP ________________
Yes the Pot in the Yaesu G-1000DXA rotator looks like a ordinary pot. The one I have got zapped by lightning and was open. I took the back cover off the pot and found the wire burnt off at one end. I
Hi Joe, I had the same problem. I got the plastic holder but not the pins. I could not find the pins anywhere other than Mouser but did not know which one to order. if you find out anything thing let
I see it posted here many times about Jack's (W1WEF) article on "Servicing the Yaesu G-1000SDX Rotator" on Page 7 of the NCJ of January/February, 2001. This is no longer in the NCJ archives. I wonder
Will have several pairs of selsyns and Ham M rotors at Dayton in Flea Market space 318. Bill/K8VP _______________________________________________ See: http://www.mscomputer.com for "Self Supporting T
I have a friend looking for a license plate antenna mount. Any Idea of a site that may have these? Bill/K8VP _______________________________________________ See: http://www.mscomputer.com for "Self S