Hello I'm looking for an "easy" method to calculate more or less a tower base for my tower. The tower is NOT self supporting. Height: 66m (220ft) Shape: triangle Material: Painted steel, not galvaniz
Hello Is cadwelding is the same as "alominotérmica" (term in spanish)? I.e. Copper oxide + aluminio powder 3CuO + 2Al = 3Cu + Al2O3 + heat And what about connecting ground roads togehter. Some
Hi all I'm still a grounding dumy but I've just bought a GEO test and have done some soil resistivity test (for just 800US$ I can do 4 pole methods, cheapest I have found and still has serial port to
Hi again Now I really don't understand anything. Today after raining 2 days I have mesaured again the resistivity (now 107ohm thats ok) and my ground in my house (3 pole method). The ground in my hou
Ok I have just found the following formula: R=0.366*res/h * log ( 3* h/d) where res=Resitividad [ohm-meters] h=depth of ground road[m] d= diameter of ground road [m] Is this correct? So in my case wi
Hello I've an other question. I've heard from an electrican that using the latrin (we are living in rural zone) who everyone has a latrin (soakaway?) is a very good solution. I tought a bit about thi
Hello I'm almost ready to install my 180ft (60m) tower. Thanks to many of the users of this forum!! There are still some remain questions. What material should be the tower base to install the iron p
Hello I want connect my tower parts (6m each part) with a copper wire 35mm² each leg (3 legs). How can I do that? I get copper tinned stuff with bolts which can press the copper wire on one end
No it is not... It is really raw iron as I wrote the same use for rebar (the iron which goes in the concrete, is this the wrong term rebar?) Where did you get this values? An of course in my case if
Hi all What's the right material to put in an concrete like a towerbase or ufer ground to connect the radials to? The radials will be copper the tower is plain iron steel as also the rebar cage of th
Of course but I tought if there is a seperate ISOLATED condoctuor the potencial difference between ground at base and ground at top would be more the same if there is a seperate conductor because the