Hi Guys: I am interested in building a rotatable dipole similar to the cushcraft D3 for installation at my QTH. I do not care if it is actually built out of tubing, or made from PVC with a wire radia
Hi Please excuse the cross post to several lists, but I am trying to achieve the largest response possible I am in the design phase of a project, and I think I need a bit of help and advice. I want t
Hi Folks I'm trying to put some work into my antenna system before winter really gets going, and I am looking to redsign my multi-band dipole. I am strongly considering a fan type dipole cut for the
Jim: That Alpha Delta Antenna that you described sounds really interesting, Do you have any ideas how to construct the loading coils for the 80 meter segment? The AT11MP tuner that I have really does
After doing some study etc. I am considering putting up a dipole for 80, 40, 20 and let it use the existing wires on 15, and 10. I built a homebrew Buddipole a while back, Would it be better for me t
Good morning again, I hope you guys don't mind a bunch of questions, I am trying to put my antenna design into MMANA, and I am having trouble specifying the source and load point. I looked at one of
Ok, I got my new antenna constructed: Its a 119 foot dipole with a 64 (?) foot 40 meter element spaced 6 inches down. I built a PVC center insulator with the connections to the dipole enclosed, and p
THANKS THANKS THANKS THANKS Thanks to all of you who helped me out. My new antenna is up in the air, and it tunes on all bands!!!!! I can tune to full power on all bands except 160, and can tune up m
I also came up with some Cable TV hardline. Its 1/2 inch (I think) - Jacketed in PVC with an Air Dialectric. I have been looking for ways to connect it for my VHF / UHF antennas. Also I am concerned
Yeah, thats what I was worrying about-- If anyone has any good suggestions, I would love to hear them, I hate to have this stuff just sitting around, not doing anything. Tim I would be concerned also
Author: "Timothy A. Holmes (W8TAH)" <w8tah@zoominternet.net>
Date: Fri, 17 Jun 2005 11:07:35 -0400
Good Morning everyone: One of the guys in the club here in town has given me the director off of an old 10-15-20m beam. I have not picked it up yet, nor do know the manufacturer or model number of th
Just an update on this topic: I picked up the director element over the weekend, and it is from a Cushcraft A3 Beam. It has two traps on each side of the element. When my friend originally picked it
I believe that the M2M group here in Medina is planning on running some SSTV -- TIM _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wirel
Hi Folks: Just thought I would give you a quick update. Over field day weekend, my Elmer (W8DD) and I reconfigured the Director element, there was sufficient Aluminum in the construction that we did