Search String: Display: Description: Sort:

Results:

References: [ +from:JMLTINC@aol.com: 43 ]

Total 43 documents matching your query.

21. [TowerTalk] 13B2 File (score: 1)
Author: JMLTINC@aol.com
Date: Sat, 15 Dec 2007 23:41:00 EST
Hi folks, Does anyone have a 13B2 EZNEC file, or know where I can find one? Thanks, John, N9RF **See AOL's top rated recipes (http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004) ________
/archives//html/Towertalk/2007-12/msg00246.html (6,757 bytes)

22. [TowerTalk] Yaesu G-5500 (score: 1)
Author: JMLTINC@aol.com
Date: Mon, 21 Jan 2008 13:42:15 EST
Any folks had trouble with a fully loaded G-5500 alt/el rotator? I have a friend who is considering putting an elliptical offset dish (probably 9 sq ft, with feed and mount) on this rotor in Northern
/archives//html/Towertalk/2008-01/msg00464.html (6,515 bytes)

23. Re: [TowerTalk] Yaesu G-450XL Antenna Rotor Problems (score: 1)
Author: JMLTINC@aol.com
Date: Thu, 28 Feb 2008 17:49:19 EST
Well, it is possible you got some RF into the unit, but they are meant to operate in an RF environment. And I do not believe in coincidences, but this one is worth a try. The indicator is run by a DC
/archives//html/Towertalk/2008-02/msg00404.html (7,940 bytes)

24. Re: [TowerTalk] Rotator Loop (score: 1)
Author: JMLTINC@aol.com
Date: Tue, 11 Mar 2008 13:16:32 EDT
Cool, on the Cool Whip, Joe. I had the same problem with the thrust bolts. I used a 6" piece of PVC, which I split down one side to get it around the mast pipe. I ground some reliefs at the bottom (w
/archives//html/Towertalk/2008-03/msg00187.html (7,797 bytes)

25. Re: [TowerTalk] Yaesu G1000SDX control box problem (score: 1)
Author: JMLTINC@aol.com
Date: Mon, 17 Mar 2008 10:19:32 EDT
Hi John, With the rotor powered up and connected to the rotor, measure the voltage at pins 1 & 3 on the Molex (or Jones) connector on the back of the control box. It should be 6 volts. When you rotat
/archives//html/Towertalk/2008-03/msg00296.html (8,292 bytes)

26. Re: [TowerTalk] Yaesu Rotator Help (score: 1)
Author: JMLTINC@aol.com
Date: Fri, 28 Mar 2008 07:35:30 EDT
Tony, Hopefully you just have the wires in the wrong place. Take an ohmmeter, and on the lowest scale, measure each wire with respect to the others. If the antenna is not against a stop, the two wire
/archives//html/Towertalk/2008-03/msg00504.html (7,828 bytes)

27. Re: [TowerTalk] Yaesu Rotator Help (score: 1)
Author: JMLTINC@aol.com
Date: Fri, 28 Mar 2008 19:04:08 EDT
Tony, The DXA and SA series are different as one has a speed control and preset and the other does not, but there is no difference in the control box between an 800 and 1000 for a given series (did t
/archives//html/Towertalk/2008-03/msg00546.html (8,215 bytes)

28. Re: [TowerTalk] Yaesu Rotator Help (score: 1)
Author: JMLTINC@aol.com
Date: Sat, 29 Mar 2008 10:01:03 EDT
Hi Tony, I am sorry if I was confusing as to the voltage the control unit spits out. The 10 - 12 volts is at the slowest rotational speed. If you turn the speed knob clockwise, the voltage will appro
/archives//html/Towertalk/2008-03/msg00589.html (8,023 bytes)

29. Re: [TowerTalk] Emoto Rotor (score: 1)
Author: JMLTINC@aol.com
Date: Sat, 29 Mar 2008 10:11:03 EDT
Ray, For what it is worth, I don't believe there is any grease that is suitable for a rotator. In the winter, the viscosity is so high, the rotor strains or stalls. Over time, the grease hardens, los
/archives//html/Towertalk/2008-03/msg00590.html (7,633 bytes)

30. Re: [TowerTalk] Yaesu Rotator Help (score: 1)
Author: JMLTINC@aol.com
Date: Sat, 29 Mar 2008 16:31:59 EDT
Hi Tony, I am sorry if I was confusing as to the voltage the control unit spits out. The 10 - 12 volts is at the slowest rotational speed. If you turn the speed knob clockwise, the voltage will appro
/archives//html/Towertalk/2008-03/msg00592.html (8,035 bytes)

31. Re: [TowerTalk] Emoto Rotor (score: 1)
Author: JMLTINC@aol.com
Date: Sat, 29 Mar 2008 16:32:59 EDT
Ray, For what it is worth, I don't believe there is any grease that is suitable for a rotator. In the winter, the viscosity is so high, the rotor strains or stalls. Over time, the grease hardens, los
/archives//html/Towertalk/2008-03/msg00593.html (7,460 bytes)

32. [TowerTalk] Fwd: Dow Corning High Vacuum Silicon Grease (score: 1)
Author: JMLTINC@aol.com
Date: Fri, 11 Apr 2008 10:03:58 EDT
I have used Stuf in the past. After a year or so, the stuff (sic) shrinks. In all cases, I found water in the connection. Ever since I have been using dielectric grease inside my connectors (no tape
/archives//html/Towertalk/2008-04/msg00217.html (7,147 bytes)

33. [TowerTalk] re; remotely switching balanced lines (score: 1)
Author: JMLTINC@aol.com
Date: Sat, 12 Apr 2008 07:11:29 EDT
Look at part number 7384K13 at _http://www.mcmaster.com/_ (http://www.mcmaster.com/) for ideas. Depending upon the load and insertion point (voltage / current), they will work fine. -John, N9RF **It'
/archives//html/Towertalk/2008-04/msg00239.html (7,273 bytes)

34. [TowerTalk] Fwd: remote switching for balanced lines - homebrew plan (score: 1)
Author: JMLTINC@aol.com
Date: Sun, 13 Apr 2008 16:15:31 EDT
Hi Gary, Looks like an interesting, and perhaps time-consuming project. I quickly perused Cebik's article. Frankly, the azimuth patterns were not all that impressive for the amount of work you will p
/archives//html/Towertalk/2008-04/msg00273.html (8,936 bytes)

35. Re: [TowerTalk] Aluminum tarnish removal (score: 1)
Author: JMLTINC@aol.com
Date: Mon, 7 Jul 2008 07:22:38 EDT
Scotch-Bright pads on the O.D. Flex hones chucked into a drill for the I.D. -John, N9RF **Gas prices getting you down? Search AOL Autos for fuel-efficient used cars. (http://autos.aol.com/used?ncid=a
/archives//html/Towertalk/2008-07/msg00177.html (8,319 bytes)

36. Re: [TowerTalk] sealing goop (score: 1)
Author: JMLTINC@aol.com
Date: Sat, 2 Aug 2008 03:06:57 EDT
Hi Art, We have all suffered the woes of water penetration. I certainly have suffered my fair share. There are four schools of thought on this subject: 1) Use a product to keep water out. These produ
/archives//html/Towertalk/2008-08/msg00028.html (9,764 bytes)

37. Re: [TowerTalk] Waterproofing Yaesu control connection (score: 1)
Author: JMLTINC@aol.com
Date: Mon, 11 Aug 2008 09:57:50 EDT
Michael, I have an 800 and a 1000. Using the boot only, I have experienced no problems for at least 5 years (I check them each year). I am sure there are some folks that have experienced problems. If
/archives//html/Towertalk/2008-08/msg00239.html (7,564 bytes)

38. Re: [TowerTalk] How do I stop 2"-OD Chromoly mast from slipping in PST-61C ro... (score: 1)
Author: JMLTINC@aol.com
Date: Tue, 19 Aug 2008 13:04:36 EDT
Pin it! -John, N9RF **It's only a deal if it's where you want to go. Find your travel deal here. (http://information.travel.aol.com/deals?ncid=aoltrv00050000000047) __________________________________
/archives//html/Towertalk/2008-08/msg00398.html (7,196 bytes)

39. Re: [TowerTalk] Running coax outside to tower on cable tray (score: 1)
Author: JMLTINC@aol.com
Date: Tue, 9 Sep 2008 07:26:21 EDT
Cut your PVC pipe in half on a TABLESAW. You now have an instant "cable tray", and it is cheap. Don't forget to paint the PVC as it is not UV resistant. -John, N9RF **Psssst...Have you heard the news
/archives//html/Towertalk/2008-09/msg00151.html (8,854 bytes)

40. Re: [TowerTalk] Why are gin poles so expensive? (score: 1)
Author: "John" <jmltinc@aol.com>
Date: Fri, 3 Oct 2008 05:21:12 -0500
Try and make one - you'll understand. It needs to have fasteners that can easilly release the fixture, yet secure as to not kill someone. It has to have a hinge. It requires tubing and a locking mech
/archives//html/Towertalk/2008-10/msg00022.html (8,434 bytes)


This search system is powered by Namazu