- 1. Topband: beverage antennas (score: 1)
- Author: ke4dyg5@netzero.net (ke4dyg5)
- Date: Tue, 20 Aug 2002 09:17:28 -0700
- I need to know how to connect receive antenna to rig? what would the easy and simple way and the cheapeast, if anyone has ideas let me know i am new to this kind of thing and need a good receive ante
- /archives//html/Topband/2002-08/msg00048.html (7,039 bytes)
- 2. Topband: beverage antennas (score: 1)
- Author: chetmoore@cox.net (Chet Moore)
- Date: Tue, 20 Aug 2002 17:10:02 -0400
- You didn't say what rig it is. Does your present rig have a jack for a 2nd antenna jack? Keep in mind that some rigs don't shut off the receiver when hooked up to a second antenna. If your rig is not
- /archives//html/Topband/2002-08/msg00050.html (6,727 bytes)
- 3. Topband: beverage antennas (score: 1)
- Author: w2pm@aol.com (w2pm@aol.com)
- Date: Tue, 20 Aug 2002 22:52:22 -0400
-
- /archives//html/Topband/2002-08/msg00054.html (7,198 bytes)
- 4. Topband: beverage antennas (score: 1)
- Author: jreisert@jlc.net (Joe Reisert)
- Date: Wed, 21 Aug 2002 11:42:08 -0400
- Pete, I believe ICE (Industrial Communications Engineers, Ltd.) has a unit that interfaces a transceiver to a separate receive antenna (actually several!) without an external receive antenna only por
- /archives//html/Topband/2002-08/msg00057.html (6,800 bytes)
- 5. Topband: Beverage antennas (score: 1)
- Author: altdx@worldnet.att.net (Dr. John Harden)
- Date: Mon, 16 Oct 2000 14:03:42 -0400
- Dear All, John Krause, W8JK, the famous electrical engineer from the Ohio State University wrote about beverages (wave antennaas) in his classic Electromagnetics, in 1952. I have a copy of that book
- /archives//html/Topband/2000-10/msg00099.html (6,886 bytes)
- 6. Topband: beverage antennas (score: 1)
- Author: barrythompson@usa.net (BARRY THOMPSON)
- Date: 22 Aug 99 20:01:06 PDT
- XAA05664 Sender: owner-topband@contesting.com Precedence: bulk X-List-Info: http://www.contesting.com/topband.html X-Sponsor: W4AN, KM3T, N5KO & AD1C My antenna farms consists of 22 acres in hilly (s
- /archives//html/Topband/1999-08/msg00053.html (8,247 bytes)
- 7. Topband: beverage antennas (score: 1)
- Author: miltj@aepnet.com (Milt Jensen, N5IA)
- Date: Mon, 23 Aug 1999 06:40:59 -0700
- hills, Barry, My experience over the last 5 years is that in most cases you want to follow the lay of the terrain. The important part is to keep the conductor an even distance above ground, whatever
- /archives//html/Topband/1999-08/msg00054.html (8,966 bytes)
- 8. Topband: beverage antennas (score: 1)
- Author: k4sb@mindspring.com (K4SB)
- Date: Mon, 23 Aug 1999 18:21:55 +0100
- Barry, a reprint of the original beverage article is available from ARRL. The antenna was specifically designed to improve reception in not only hilly, but mountainous terrain. If I remember, the tes
- /archives//html/Topband/1999-08/msg00055.html (7,771 bytes)
- 9. Topband: beverage antennas (score: 1)
- Author: k3nd@yahoo.com (GALE STEWARD)
- Date: Mon, 23 Aug 1999 09:37:28 -0700 (PDT)
- Milt. I had always heard that to "follow the lay of the land" was the preferred installation technique. Never thought of the counterpoise wire to simulate the "missing" ground. A great idea! Never he
- /archives//html/Topband/1999-08/msg00056.html (7,731 bytes)
- 10. Topband: beverage antennas (score: 1)
- Author: aa8u@modempool.com (Bruce Lallathin)
- Date: Mon, 23 Aug 1999 15:38:49 -0400
- --==_1629385==_.ALT Content-Type: text/plain; charset="us-ascii" == Hi Barry, I have a very similar situation here and struggled for several years with this. I tried making the wires follow the terra
- /archives//html/Topband/1999-08/msg00057.html (9,790 bytes)
- 11. Topband: beverage antennas (score: 1)
- Author: k4sb@mindspring.com (K4SB)
- Date: Mon, 23 Aug 1999 21:56:12 +0100
- If you are talking about an identical wire laying on the ground under the Beverage, a counterpoise is the absolutely worst thing you can do. The Beverage depends on a lossy ground under the wire. ( n
- /archives//html/Topband/1999-08/msg00058.html (8,167 bytes)
- 12. Topband: beverage antennas (score: 1)
- Author: miltj@dvec.org (Milt Jensen)
- Date: Mon, 23 Aug 1999 16:16:20 -0600
- <199908232112.RAA11288@contesting.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-topband@contesting.com Precedence: bulk X-List-Info: http://www.contest
- /archives//html/Topband/1999-08/msg00059.html (10,319 bytes)
- 13. Topband: beverage antennas (score: 1)
- Author: bogus@does.not.exist.com ()
- Date: Mon, 23 Aug 1999 19:53:53 -0400 (EDT)
- --WebTV-Mail-2387-11154 Content-Type: Text/Plain; Charset=US-ASCII Content-Transfer-Encoding: 7Bit Ed is correct. 73, Thom KN4LF. -- FAQ on WWW: http://www.contesting.com/topband.html Submissions: to
- /archives//html/Topband/1999-08/msg00060.html (7,653 bytes)
- 14. Topband: beverage antennas (score: 1)
- Author: lew@teleport.com (lew@teleport.com)
- Date: Mon, 23 Aug 1999 19:02:58 -0700 (PDT)
- HI Barry, A couple of years ago I put up 4 Beverages, all 580' long. My QTH is on top of a hill with negative horizon in all directions. I run 1 antenna short path, 1 long path, 1 JA and 1 Caribbean.
- /archives//html/Topband/1999-08/msg00061.html (9,455 bytes)
- 15. Topband: beverage antennas (score: 1)
- Author: ni6t@best.com (Garry & Yelena)
- Date: Mon, 23 Aug 1999 20:56:49 +0000
- <199908231944.PAA07247@contesting.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-topband@contesting.com Precedence: bulk X-List-Info: http://www.contest
- /archives//html/Topband/1999-08/msg00062.html (9,469 bytes)
- 16. Topband: beverage antennas (score: 1)
- Author: miltj@aepnet.com (Milt Jensen, N5IA)
- Date: Mon, 23 Aug 1999 21:46:33 -0700
- Ed and others, My apologies for leaving out one key word in this paragraph in my earlier posting. The word NOT should have been a part of the last sentence. 73 de Milt, N5IA conductor must cross a gu
- /archives//html/Topband/1999-08/msg00064.html (8,067 bytes)
- 17. TopBand: Beverage Antennas (score: 1)
- Author: MALEXANDER@HEALTHDYNE.com (MALEXANDER@HEALTHDYNE.com)
- Date: Fri, 17 Apr 1998 11:09:27 -0400
- Hello, Gentlemen: I am making plans to start implementing a beverage at my QTH. I live in a subdivision where antenna restrictions are not enforced at all. Everyone knows I'm a ham and it's cool. My
- /archives//html/Topband/1998-04/msg00185.html (7,876 bytes)
- 18. Topband: beverage antennas (score: 1)
- Author: mike l dormann <w7dra@juno.com>
- Date: Sun, 20 Jun 2004 16:25:14 -0700
- i live on a Seattle street running north and south, and the just completed AA dx contest i ran a 1000 foot wire on the ground -of coursein parallel with all the street lights, power wires, telephone
- /archives//html/Topband/2004-06/msg00061.html (7,018 bytes)
- 19. Topband: Beverage antennas (score: 1)
- Author: "LA6FJA/K3RAG Stein Roar Brobakken" <s-roabr@online.no>
- Date: Sat, 13 Sep 2008 21:54:42 +0200
- Hi My qth is quite downhill sloop and I wonder if anyone have a idea what this will give on a beverage antenna? 73s de Rag LA6FJA K3RAG _______________________________________________ Topband mailing
- /archives//html/Topband/2008-09/msg00039.html (7,532 bytes)
- 20. Topband: beverage antennas (score: 1)
- Author: "Fred Bennett" <n2fj@n2fj.com>
- Date: Thu, 17 Mar 2011 12:55:04 -0400
- Hi all.. Iam getting ready to put up a bunch of beverage antennas.. I was told that I could use electric fence wire for them.. any suggestions on this? 73, Fred N2FJ _________________________________
- /archives//html/Topband/2011-03/msg00061.html (6,185 bytes)
This search system is powered by
Namazu