Author: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
Date: Mon, 9 Jul 2018 20:22:30 -0300
Looked all over for one of these so my Beverages could be selected remotely via an IP address. Is there such a device marketed anywhere? Herb, KV4FZ _________________ Topband Reflector Archives - htt
Yes. That's what the late and great Milt Jensen and his club used. 73, Mike www.w0btu.com _________________ Topband Reflector Archives - http://www.contesting.com/_topband
I am using one from RA6LBS. He has very nice push button BV selector. http://lowbandsystems.com/product/sontroller-lbc8ard Or you can try simple version. Good luck! EY8MM/DL Sent from my iPad _______
Sorry I forgot to add. You will need control software and IP switch. Drop him e-mail for full package. MM Sent from my iPad _________________ Topband Reflector Archives - http://www.contesting.com/_t
Hi Herb, A simple microcontroller equipped with an ethernet phy (such as RasperryPI) is what I use. It needs a bit of coding, but Python is pretty simple for that. 73, Greg, ZL3IX Herb, KV4FZ _______
Hello , I use this : http://foxdelta.com/products/remote-usb-switch.htm VY 73 Pat ON7PQ . --Oorspronkelijk bericht-- Van: Topband [mailto:topband-bounces@contesting.com] Namens Mike Waters Verzonden:
Author: Eugene Popov /RA0FF/ via Topband <topband@contesting.com>
Date: Tue, 10 Jul 2018 10:34:07 +0300
Hi Herb, https://denkovi.com/ For many years I use simple and reliable devices of this manufacturer. Including for remote control of the radio station. For these devices there is a ready-made free
Hi ! , on 160 m qso US4EX UY5VA rx antennas , .. ............................... https://clublog.org/charts/?c=KH1/KH7Z -- What is this for ? : http://www.arrl.org/system/dxcc/view/DXCC-160M-20180710
Like RA0FF I use the Denkovi 8 relay USB board together with the PST rotor control software that provides a standard rotor control interface. Point and shoot at the direction with the mouse to select
Can you give so more info on how the PST software works/connects to the board, I use it to turn my rotator but have never seen any option to control anything else in it, Thanks Trevor EI2GLB -- Origi
Hi Trevor, It is very well described in the PST user manual, but can be a bit confusing. First of all you create a second instance" of PST rotator. (or however many you need.) Under settings select R
Thanks Steve must have a look when I get the shack set back up, 73 Trevor EI2GLB -- Original Message -- From: VE6WZ_Steve <ve6wz@shaw.ca> To: MR TREVOR DUNNE <ei2glb@eircom.net> Cc: '''''topband List
Author: Eugene Popov /RA0FF/ via Topband <topband@contesting.com>
Date: Wed, 11 Jul 2018 05:05:05 +0300
All information, files, programs are on their website. Including there is software for smartphones. I also use 8 Ports IP Relay to control the switching of my Beverages. I downloaded the software (wr