- 21. Topband: Topband CW Speed (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Wed, 21 Jan 2009 07:26:43 -0800 (PST)
- I had a discussion about this with Bob, K4UEE, at Dayton two years. It was my opinion that some DXpedition ops were sending much too fast. We agreed that around 22 wpm was a good speed for DX on topb
- /archives//html/Topband/2009-01/msg00212.html (6,773 bytes)
- 22. Topband: Home Depot RG-6 Cable (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Thu, 29 Jan 2009 12:55:55 -0800 (PST)
- Stay away from the low priced RG-6. I used to buy 500 foot rolls of RG-6 Quad from Home Depot to be used to feed my beverages and K9AY loop. The cable was made in Canada. Its weakness is its PVC ja
- /archives//html/Topband/2009-01/msg00318.html (7,270 bytes)
- 23. Topband: Reverse Beverages (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Fri, 21 Aug 2009 13:27:08 -0700 (PDT)
- I've also got both DXE and a homebrew KDSV reversible beverage here in Ohio. They are approximately 450 feet long. The commercial DXE boxes use the 450 ohm ladder line. Performance is outstanding in
- /archives//html/Topband/2009-08/msg00088.html (7,615 bytes)
- 24. Re: Topband: Trees and RF (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Wed, 4 Nov 2009 08:46:39 -0800 (PST)
- I am absolutely convinced that tall trees next to a low band vertical have a very negative effect on my radiated signal. For the past 11 years, I have had the opportunity to live on 3 acres of land w
- /archives//html/Topband/2009-11/msg00123.html (9,218 bytes)
- 25. Topband: Happy 92nd Birthday Alex W0ZTL (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Mon, 9 Nov 2009 18:05:13 -0800 (PST)
- Many of you have worked Alex, W0ZTL over the years. Today is Alex's 92nd birthday and he is a very active Topbander. Alex has given many dx stations their only North Dakota QSO. I spoke with Alex a
- /archives//html/Topband/2009-11/msg00281.html (6,961 bytes)
- 26. Topband: Preamp (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Fri, 3 Sep 2010 13:57:30 -0700 (PDT)
- Jose: The 2N5109 makes a superb preamp, However, make sure that you read the info on Larry, W7IUV's website FIRST. He has modernized and updated the circuit. www.w7iuv.com 73, Dennis W0JX Milan, OH _
- /archives//html/Topband/2010-09/msg00013.html (6,184 bytes)
- 27. Topband: Beverage Height Over Driveway (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Fri, 8 Oct 2010 18:39:23 -0700 (PDT)
- Four of my beverages cross my main driveway. I actually measured the heights of both the UPS and FedEX trucks in my driveway. It is 10.5 feet from pavement to the top of the trucks, so I set my bever
- /archives//html/Topband/2010-10/msg00040.html (6,420 bytes)
- 28. Topband: Happy Birthday Alex W0ZTL_No 93! (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Tue, 9 Nov 2010 10:21:05 -0800 (PST)
- Topbanders, Today is Alex's (W0ZTL) 93rd birthday. I spoke with him yesterday and he is in great health and spirits. Still operates CW on 160 from North Dakota regularly so give him a call if you he
- /archives//html/Topband/2010-11/msg00035.html (6,586 bytes)
- 29. Topband: Short Loaded Beverages (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Sun, 23 Jan 2011 12:27:23 -0800 (PST)
- There is too little written about the usability of short beverages. During this recent discussion, no one has mentioned the use of the inductance loaded beverage as described in ON4UN's book and also
- /archives//html/Topband/2011-01/msg00132.html (6,973 bytes)
- 30. Topband: Skin Effect of RG-6U (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Mon, 31 Jan 2011 15:02:52 -0800 (PST)
- I have found that the quality, and therefore the loss, of RG-6 cable varies quite a bit. On the average, I measure about 14 ohms of resistance in 500 feet if shorted at the far end. Recently, I put u
- /archives//html/Topband/2011-01/msg00168.html (7,152 bytes)
- 31. Topband: Feeding the Shunt Fed Tower (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Thu, 15 Dec 2011 21:02:10 -0800 (PST)
- I have been using a shunt fed tower on 160 since 1979. My first was a 60 foot Universal with a TH6 on top. The shunt wire was three #14 wires twisted together and tied to a three foot aluminum tube v
- /archives//html/Topband/2011-12/msg00426.html (7,878 bytes)
- 32. Re: Topband: HiZ Delay and Preamp Boxes (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Thu, 5 Jan 2012 22:51:41 -0800 (PST)
- Doug: I took shipment of my Hi-Z 4-8 Pro system in October. You can leave the delay lines coiled up just like they were shipped (Of course you have to separate the long and the short delay cables).
- /archives//html/Topband/2012-01/msg00087.html (7,362 bytes)
- 33. Topband: MFJ-1026 Mods (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Tue, 10 Jan 2012 10:45:16 -0800 (PST)
- Paul: I did the mods a few years ago before I was able to install more low noise antennas. Removing the front end filters alllowed more BCI and intermod problems. I put another cap in to extend the
- /archives//html/Topband/2012-01/msg00148.html (7,192 bytes)
- 34. Topband: 706T on 160 and 80 (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Fri, 11 May 2012 13:07:39 -0700 (PDT)
- Log shows most recent 160Q's from last night but the 80 meter Q's are all missing. Anybody know if there is a log problem or maybe it was Slim at the key on 80? 73, Dennis W0JX/8 __________________
- /archives//html/Topband/2012-05/msg00133.html (6,542 bytes)
- 35. Topband: Ferrite Distributor (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Mon, 2 Jul 2012 03:44:16 -0700 (PDT)
- Another very good distributor is Elna Magnetics in New York. Last time I ordered, there was a $25 minimum. They have a very extensive online catalog filled with specifications. Dennis W0JX/8 ______
- /archives//html/Topband/2012-07/msg00012.html (6,513 bytes)
- 36. Topband: RX 4 Square and Surrounding Verticals (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Thu, 9 Aug 2012 14:33:32 -0700 (PDT)
- In January, I completed installation of a HiZ 4 square system which is located about 150 feet northwest of my 160 meter shunt fed tower. Initially, there was a wire dual flag RX antenna quite close t
- /archives//html/Topband/2012-08/msg00146.html (12,067 bytes)
- 37. Topband: RX 4 SQ Phasing (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Fri, 10 Aug 2012 07:52:22 -0700 (PDT)
- Bob, for a good understanding of the concepts of phasing in these RX antennas, read Chapter Seven of ON4UN's "Low Band DXing." The length of the delay lines primarily affects the placement of the nu
- /archives//html/Topband/2012-08/msg00148.html (7,444 bytes)
- 38. Re: Topband: Elevated Radials Questions (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Thu, 13 Dec 2012 12:06:31 -0800 (PST)
- Grant, you should consider putting in an additional 23 radials and put the radial system on or in the ground. This will eliminate any possible detuning by the big metal building and interaction with
- /archives//html/Topband/2012-12/msg00352.html (7,413 bytes)
- 39. Topband: RF on beverages (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Wed, 16 Jan 2013 13:25:00 -0800 (PST)
- I have used an MFJ 1026 in the past in an attempt to phase beverages. There are small protective bulbs in the input circuits to protect against high levels of RF pickup. These can really "light up" i
- /archives//html/Topband/2013-01/msg00124.html (6,732 bytes)
- 40. Topband: Price of Copper Going Up (score: 1)
- Author: Dennis W0JX <w0jx@yahoo.com>
- Date: Wed, 6 Feb 2013 20:16:23 -0800 (PST)
- For those of you planning on putting in big ground radial systems, you might want to buy your wire sooner than later. Either that or hedge your cost by investing in copper futures! See link below: ht
- /archives//html/Topband/2013-02/msg00058.html (6,465 bytes)
This search system is powered by
Namazu