here's an unusual problem. I have two scout transceivers. two forty modules. one of the modules causes the display to become unstable when in transmit on ssb. cw seems to be fine. it's the module, be
Hi Mike, had a Scout tha that had the same problem.its a seating glitch where the module does not "home" allthe way into the socket in the Scout mainframe..Try this:be sure that the female mating plu
Mike: Sounds like RF is getting into it. Perhaps one of the grounds is marginal. Make sure the contacts are clean. 73, Bob WB2VUF _______________________________________________ TenTec mailing list T
Mike The only time I have had that problem was when the module was not firmly seated in place. W5wbl -- Original Message -- From: "MIKE BRYCE" <prosolar@sssnet.com> To: <TenTec@contesting.com> Sent:
the problem... is only there with this one module, in either scout radios.. so, the bug has to be with the module... Mike Bryce, WB8VGE SunLight Energy Systems http://www.seslogic.com http://www.theh
With a lint free cloth and ethyl alcohol, or TV tuner cleaner at least, clean the board edge contacts. Spray tv tuner cleaner into the socket contacts as well. Make sure module is fully seating, some