Author: Byron Cordes via TenTec <tentec@contesting.com>
Date: Thu, 28 Jan 2021 10:32:31 -0600
I too have had warranty repair lately. Yaesu ftm 400 and a ft3 both where just replace with new units. It was fast service , two days a shop and radio was shipped out. 73s Byron AC9PA I had a small p
1. Does anyone know the I2C clock speed in the Eagle 599. 2. I have two and a half Eagles. One of the two complete Eagles is misbehaving with regard to the multi-control. I don't want to replace the
Author: Carlos PECO BERROCAL <carlos.peco@gmail.com>
Date: Thu, 4 Feb 2021 10:32:28 +1100
Hi Bob, I would wire the encoder from radio B into radio A, without taking anything out of the radios (just fitting some short cables in between the two). Would it be possible to do that ? 73, Carlos
Author: Carlos PECO BERROCAL <carlos.peco@gmail.com>
Date: Thu, 4 Feb 2021 10:34:24 +1100
I can make some captures on the I2C bus but not until the 20th or so (busy weekends at the moment). 73, Carlos _______________________________________________ TenTec mailing list TenTec@contesting.co
Bob: I'd say 99% of the issues of this type are from a dirty control. It can be removed, it can be opened and cleaned and it can be re-assembled and installed into the radio. I have pictures of t
Couldnt agree more ITs the control. You dont check the timing of your engine when the brakes squeal when you stop. mike, wb8vge The trouble with quotes on the Internet is that you never know if they
WTB A VFO Module for a TEN TEC radio. I have a Corsair II that is fully operational that is in need of a VFO . Seems like the current VFO has some broken parts in it that need to be junked. Broken