Late last year the serial port on my Orion failed. The DSP module was returned to Ten-Tec who replaced the 4 ceramic 1uF capacitors. I replaced the board and it worked well. Until today. I have been
Have you tried unplugging the rig and letting it stand for awhile. Dumb as it sounds, I have revived various computer systems this way, whereas no efforts to reboot, clear the BIOS to factory setting
Thanks, It seems to be working again now. Or at least I was eventually able to load code into it and it seems okay. The symptoms were that the firmware loader was telling me it could not find the rig
Good news. Thanks for the uptake and follow up. == K8JHR == == _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/t
I would sure be adding the computer's serial port to the list of suspects. Barry N1EU _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting
Late last year the serial port on my Orion failed. The DSP module was returned to Ten-Tec who replaced the 4 ceramic 1uF capacitors. I replaced the board and it worked well. Until today. I have been
Sorry to say I had a similar failure. I damaged the board trying to replace the failed MAX232. Sent it back to ten-tec for a board replacement at about 500 $. If you are not comfortable with smd repa
Thanks for the information Ken, I have no real issues working on smd stuff, I have most of the right sort of tools and can do all but the really scary hundred legged devices. So far as I know I haven