- 1. [TenTec] Omni-V TR problem (score: 1)
- Author: Ralph Matheny <mathenyr@marietta.edu>
- Date: Thu, 18 Oct 2007 10:29:35 -0400 (EDT)
- During this past weekend's fray in the Pennsylvania QSO party with the Omni in "Ole Rusty", I encountered a problem with failure of the receiver to recover to full sensitivity after a transmission. O
- /archives//html/TenTec/2007-10/msg00353.html (7,715 bytes)
- 2. Re: [TenTec] Omni-V TR problem (score: 1)
- Author: "Rick, NJ0IP / DJ0IP" <Rick@DJ0IP.de>
- Date: Thu, 18 Oct 2007 09:47:18 -0500
- Ralph, Do you have a linear amplifier between the transceiver and the antenna? This is the typical problem you get when the T/R relay contacts inside the amplifier are burnt. You fix it by burnishing
- /archives//html/TenTec/2007-10/msg00354.html (8,078 bytes)
- 3. Re: [TenTec] Omni-V TR problem (score: 1)
- Author: <waltk8cv4612amos@att.net>
- Date: Fri, 19 Oct 2007 11:15:21 -0400
- Sticky reed relay. They are cheap enough, but you have to take the whole back of the radio apart. Not for the faint of heart ! Walt K8CV Royal Oak, MI. _______________________________________________
- /archives//html/TenTec/2007-10/msg00380.html (8,686 bytes)
- 4. [TenTec] Omni-V TR problem (score: 1)
- Author: "Rob" <rabbueche@dslextreme.com>
- Date: Wed, 21 Nov 2007 07:40:59 -0800
- Re the intermittent receive signal strength. You may have a bad reed relay. The reed relay shorts the Receiver input to ground when Xmiiting.When receiving the signal goes through the reed contacts A
- /archives//html/TenTec/2007-11/msg00471.html (7,660 bytes)
- 5. Re: [TenTec] Omni-V TR problem (score: 1)
- Author: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
- Date: Fri, 23 Nov 2007 13:05:47 -0600
- If that's the case, then bad reed relay contacts when closed affect receiver PROTECTION but not the received signal. Unless the contacts have whiskers or flakes so they don't open. More often the pro
- /archives//html/TenTec/2007-11/msg00478.html (8,646 bytes)
This search system is powered by
Namazu