HELLO ALL Ok .I got my hands on a Pegasus. I used to have a old omni D. I fell in love with Ten Tec at that point. And just had to try out a newer Ten tec. Wanted a Omni VI but lack of funds.. But an
Try any of the mics but I found that getting the Hiel element for the D 104 mic is the best of all the worlds. Also any of the Ten Tec mics will work well. You can find some used TT mics sometimes on
I use amplified D104 mics on both my Argonaut II and Omni V with great results. I set the gain on the internal mic preamp to nearly minimum to prevent overdrive of the radio's audio circuits. I have
Steve, What type of amp do you use with your D-104? Is it a really small amp built into the base? Is it home brew? Do you still have the schematic drawing? Thanks, DW Holtman WB7SSN _________________
Author: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
Date: Thu, 26 Jun 2008 19:54:32 -0600
Amplified D-104 were made for the CB trade. The makers of CBs have decided to prevent over modulation by limiting the audio gain, to the point of killing communications range. Base stations talked be
Author: "James C. Owen, III" <k4cgy_list@yahoo.com>
Date: Fri, 27 Jun 2008 07:10:07 -0700 (PDT)
Hi Derwin, I have a Jupiter and since it's very close to a Pegasus the mike used should work the same on both. I use an unamplified D-104 and it works fine and I get excellent reports. The guys that
Author: "Geoffrey S. Mendelson" <gsm@mendelson.com>
Date: Fri, 27 Jun 2008 17:41:37 +0300
The Astatic amplifier in the D-104 base is designed as an impedence matching device, not a "talk power improver" (whatever that would be). There is some insertion loss, so if the gain is set at it's
Hi Steve I have a pegasus and I use a d104 without a amp it works very well thanks ,ken> From: tubestuff@comcast.net> To: tentec@contesting.com> Date: Thu, 26 Jun 2008 13:08:52 -0600> Subject: Re: [T