- 1. [TenTec] FSK on Orion II? (score: 1)
- Author: K5XS@aol.com
- Date: Thu, 27 Dec 2007 10:48:31 EST
- Has anyone had success running FSK on the Orion II? I am running MMTTY, and it works great on AFSK. Receive works fine on FSK, but when I send, the distant end (including the other side of the shack)
- /archives//html/TenTec/2007-12/msg00751.html (6,943 bytes)
- 2. Re: [TenTec] FSK on Orion II? (score: 1)
- Author: "george" <goofyham@rochester.rr.com>
- Date: Thu, 27 Dec 2007 11:12:54 -0500
- Bernie; You didn't mention what interface you are using. I use a Home Brew 2N2222 transistor to key the O2 RTTY and PTT with no problems on RTTY. I use the output audio from the O2 through a Radio Sh
- /archives//html/TenTec/2007-12/msg00752.html (7,826 bytes)
- 3. Re: [TenTec] FSK on Orion II? (score: 1)
- Author: K5XS@aol.com
- Date: Thu, 27 Dec 2007 11:18:20 EST
- Thanks, George. I am using the BUXCOMM interface, and as I mentioned, it works great on AFSK. It's just FSK that won't work right. Bernie In a message dated 12/27/2007 10:13:17 A.M. Central Standard
- /archives//html/TenTec/2007-12/msg00753.html (8,065 bytes)
- 4. Re: [TenTec] FSK on Orion II? (score: 1)
- Author: "David W LeJeune, Sr" <lejeuned@centurytel.net>
- Date: Thu, 27 Dec 2007 10:26:41 -0600
- Hi Bernie I'm running MMTTY with the ORION II with FSK. To do so you have to download the EXTFSK (ver 1.05) pluggin for MMTTY. http://mmhamsoft.amateur-radio.ca/extfsk.htm Under Options, select SETUP
- /archives//html/TenTec/2007-12/msg00756.html (9,973 bytes)
- 5. Re: [TenTec] FSK on Orion II? (score: 1)
- Author: "John K Gotwals" <john@gotwals.com>
- Date: Thu, 27 Dec 2007 11:37:23 -0500
- Have tried changing the setting for FSK Tx Data in your Orion? John, N9JG = = = = = Original Message = = = = = Date: Thu, 27 Dec 2007 10:48:31 EST From: K5XS@aol.com Subject: [TenTec] FSK on Orion II
- /archives//html/TenTec/2007-12/msg00757.html (8,280 bytes)
- 6. Re: [TenTec] FSK on Orion II? (score: 1)
- Author: "G3RXP" <g3rxp@btinternet.com>
- Date: Thu, 27 Dec 2007 16:38:45 -0000
- Hello Bernie I can confirm that the 02 works well with FSK, and Im using N1MM / MMTTY. The input to the mark/space Connector is at the back of the rig, and you should be able to monitor the tones whe
- /archives//html/TenTec/2007-12/msg00758.html (9,421 bytes)
- 7. Re: [TenTec] FSK on Orion II? (score: 1)
- Author: K5XS@aol.com
- Date: Thu, 27 Dec 2007 11:41:16 EST
- John, Yes (as below), I toggled the Mark state from High to Low without effect. Thanks. Bernie In a message dated 12/27/2007 10:37:47 A.M. Central Standard Time, john@gotwals.com writes: Have tried c
- /archives//html/TenTec/2007-12/msg00759.html (8,180 bytes)
- 8. Re: [TenTec] FSK on Orion II? (score: 1)
- Author: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
- Date: Thu, 27 Dec 2007 12:03:06 -0600
- I worked a station last evening that was running FSK RTTY with an Orion II. Good signal and accurate 170 Hz shift. He indicated that he did a lot of contest work very successfully. Don't recall the s
- /archives//html/TenTec/2007-12/msg00760.html (9,555 bytes)
- 9. Re: [TenTec] FSK on Orion II? (score: 1)
- Author: K5XS@aol.com
- Date: Thu, 27 Dec 2007 13:43:35 EST
- Thanks, Bob. I'm sure it's a configuration issue. I'll trifle with it and see if I can get it going. HNY 2008! Bernie In a message dated 12/27/2007 12:02:00 P.M. Central Standard Time, RMcGraw@Bloman
- /archives//html/TenTec/2007-12/msg00761.html (8,054 bytes)
- 10. Re: [TenTec] FSK on Orion II? (score: 1)
- Author: "george" <goofyham@rochester.rr.com>
- Date: Thu, 27 Dec 2007 15:08:31 -0500
- I'd have to see what the schematic looks like. May be a distortion of the (wiggle) voltage to the O2 from the Bauxcomm. I had that when another ham in our club wanted isolation between his computer a
- /archives//html/TenTec/2007-12/msg00763.html (8,179 bytes)
This search system is powered by
Namazu