Darned if I can remember the connections for the Titan 425 to the Corsair. I want to get the sequencing right for QSK. Anyone know which goes where so both units are copaesthetic? Thanks, Gary KA1J _
Hi Gary, Key the Corsair from the Titan, connect the keyer to key in on the Titan, and connect key out from the Titan to the key in on the Corsair. 73 Tim gm4lmh -- Original Message -- From: "Gary Sm
Hi Tim, I'll do that. Any suggestion as to SSB connections? Thnks, Gary KA1J _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mail
Author: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
Date: Tue, 09 Dec 2008 19:08:25 -0600
Nah, that's wrong. Key the Corsair. Take out the jumper on the back that connects Key Out to Key In. Hook Key out on the Corsair to Key in on the amp and Key Out on the amp to Key In on the Corsair.
Hi Jerry, I use an external keyer so I can't do that. The key in you'r thinking of is where I need to put the key. If I hook it up the way you're thinking it would work fine but I'd need to use the i
There are at least two different T/R switching configurations for Corsair II radios. Mine is an earlier model, which does not have the connections for key in and key out. The later versions do have t
Author: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
Date: Tue, 09 Dec 2008 22:10:41 -0600
There are two other outputs on the back of the rig, ext T/R a relay output for controlling a PA and a QSK output that is open collector and I presume a lot faster but without the delay of the relay w
Hi all, If your Corsair II has the TX EN and TX OUT jacks like Paragons and Omnis do, then the QSK keying loop, connected to a Titan amplifier, will work equally well using an external keyer connecte
Hi All, There is no keying loop on my Corsair II, although there is a socket labled qsk. I enquired of TT and their reply was to key the amp, if there was no keying loop. 73 Tim gm4lmh ______________
Tim (and all others with this problem), I have the Ten-Tec provided mod to provide the keying loop QSK capability on the back panel of Corsair IIs. I sent it to the group last night as a PDF attachme
There is a QSK mod on the 560 & 561 pages of the TenTecWiki. You can download it from http://www.tentecwiki.org/doku.php?id=560 . 73, Alan N5NA http://www.tentecwiki.org _____________________________
Thanks for locating the QSK mod. It appears to be the one I previously submitted to the TenTecWiki but I could not remember where it was "filed". 73 & DX, Gary - AB9M ________________________________
Author: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
Date: Wed, 10 Dec 2008 14:34:28 -0600
E-mail attachments are sent using only the printable character set so are recoded in base 64 which makes them take up many more bytes than the binary file. Its most effective to post such a file on a
Thanks Jerry, I apologize for repeating the mistake. I was reminded that I'd previously uploaded the PDF to the TenTecWiki and that it can be see on the 560 & 561 pages of the TenTecWiki. You downloa