dotage. It's a miracle he didn't kill somebody." Not for W6AM. If you can copy QRQ in your head, there's less propensity for an accident than holding a conversation in a vehicle while periodically t
Dave, Nice research. It's hard to believe the Omni Six design is now 25 years old. Paul, W9AC --Original Message-- From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Dave Bowker via Ten
ever made IMHO. Also has the sweetest sounding cw receiver ever. And then there's that fantastic qsk. etc etc" And one of the best NR functions I've heard. If I wasn't so spoiled with DDC/DUC with b
on some customers and explain our chargers they would say your not a Doctor, Surgeon, Lawyer." I am a lawyer and more often than not, clients still believe my time is free. The #1 offenders are phys
Hard to believe the Omni Six is now 25 years old. I recall seeing it during the 1991 Dayton Hamvention. It's DSP NR feature was one of the best heard and I'm not sure why it could not be replicated i
I just acquired a Triton 544 (Digital) and would like to rebuild the PTO. My understanding is that TT is no longer supplying the PTO rebuild kits. Anyone have a spare kit that's surplus to their need
To start, I would offer the Eagle or Omni 7 in separate units, just like the Kenwood TS-480. Give it a new name, keep the TT brand. The units would be divided into: 1) a sufficiently large and thin d
FYI - Paul Clinton at TT just informed me the PTO rebuild kits ARE still available. USD $35 + $7 S&H. Paul I bought a rebuild kit from Ten Tec for my Argonaut 515 several months ago. I don't know if
I think you mean Scott Robbins, W4PA. I have to believe he would like to own the company he helped build since the 1980s. If it's him, he has the business acumen to make this happen. Having worked fo
Found this message thread a bit late. I am in the processes of localizing a display brightness issue with my Triton 544 -- specifically the green 7-segment LED, manufactured by HP, part number 5082-7
Mike, Great info. Thanks for the heads-up on the lens filter. That's probably the root cause of the brightness attenuation. Referring back to the schematic, the LED segment current is limited by seve
"Biggest problem with P II's for ME is the LSB/USB discrepancy....LSB higher in pitch. I have had this on 3 of them, and I cannnot figure it out. (2.4 wide, but say 400Hz-2800 Hz vs 250-2650Hz on USB
Mike, Or, maybe cut the existing filter and leave over the red digits, then place a green filter over only the green digit. I guess there's a few possibilities to help with this. Paul, W9AC Paul, i d
the FLEX 6000. I made timing and latency measurements of my Flex 6700 using an Agilent 4-channel DSO. I captured the data and uploaded the DSO graphic images. Keep an eye on the PTT trace from the e
Have a look at image #7 in the previous link. The DSO is set to 20ms/div. So roughly, the time from key-up to Rx audio is 70 ms. I failed to state at what Rx filter setting the measurement was taken
Well, image #7 shows the latency from the time of physical key-up to the point Rx audio is present. It shows a lot of other interesting things going on too. Paul, W9AC Paul you're measuring specifica
Yeah, like that! I was arguing for keeping it because the side-tone is real time and it just blended in over the Rx audio a tiny bit. But, folks who have been accustomed to quasi-QSK got their way an
Barry, Can you measure the Flex 6500 at say...a 2.8K filter setting? I know this not a normal CW bandwidth for contesting but it would be helpful to see what timing changes have evolved since my last
Barry, Somewhat similar issues with the K3 when using the SDR-IQ. Other SDRs here can see much more detail at the baseline level when compared with the K3/SDR-IQ -- even after using a Clifton Labs bu