Good morning all - I am a very new O2 owner so I may be missing an option that will answer my want. I am using version 2.044A and 2.10B110 My request is when using the band stacking, retain all the s
I am wondering what a fair price for a good used Omni VI & PS/Speaker would be. It's in great electrical operating condition but the top panel has some slight damage.It has 500, 250 and 250 in the Na
Sam, I cannot find this reference. lists@subich.com is an email address? Even a Google search didn't bring up the BCD reference. Is there a web site? Thanks & 73, Rod/w7zrc __________________________
Any Orion II owners using an Ameritron QSK-5 switch with a non TenTec amp? I am trying to set up a QSK-5 with my O2 and a Kenwood TL-922A. I think I have it figured out, but have been blowing the pro
Thanks Rick, I agree, changing the old relays to vacuum, etc. would be the best way to go. I have the documentation from the web for that project and decided I didn't want to go to all the trouble. I
Just now my Orion II audio in the main receiver quit. At the same time the S-meter appears to have settled to zero or nearly so. I waited a couple seconds and the audio came back then quit again. The
Thanks Carl and Mike for your suggestions. I have verified that I have a good 13.8 vdc supply voltage. I also replaced the battery and removed the front panel and cleaned the connectors. No joy ... N
Good afternoon, I just had a similar problem with my Orion II. I replaced the battery, removed the front panel, cleaned and reseated all the connectors, but the real problem was the 470mfd caps on th
That's odd, when I was fixing my cap problem, the tech said they could not sell me the board. I had to send it in for repair only. Maybe I talked to wrong guy. It was their Service Dept. Maybe you ta
I know this is just before SS SSB ..... Problem: When I click on a function key to send a .wav file, something in Logger resets my Mic gain setting on the Orion to zero. If I turn up the Mic gain set
Josh, I would try it into a dummy load and see how it works. 73 and good luck, Rod w7zrc _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contest
I am interested in your work too. I just purchased a Yamaha CM-500 headset and it has lots of gain compared to my old Pro Headset. Thanks and 73, Rod w7zrc ___________________________________________
Thanks, nice job of documenting the project! 73, Rod/w7zrc _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tent
Thanks guys! My rig is an Orion II. Mic gain at the approx 20% level seems to be good for the CM500. I ran it before at 50% with the HC4 element. I'll get a few more critical reports as you sugg
Jim, Can you change modes to USB using rig control software like HRD, N4PY or even N1MM? If so, that would also indicate a possible hardware button problem. Rod/w7zrc ________________________________
I just installed a new to me microKeyer II. Trying to follow the setup instructions in the manual, I connected a mono cable (RCA plugs) between Amp Key 1 on the O2 and PTT IN on the mK2. When the O2
Joe, you are the man! I remember reading that but didn't remove the jumper. Now jumper is removed and cable is restored and all is working fine. I still need to test with N1MM, etc. but I am confiden
Thanks guys! This is all excellent information. After I had posted my question yesterday I went back to the house and settled in for the evening, so I hadn't read any of these messages. Joe solved my
Phil, I just use the batter box with my CM500 and Orion II. Works fine. Rod/w7zrc<a href="http://overview.mail.yahoo.com?.src=iOS"><br/><br/>Sent from Yahoo Mail for iPad</a> ________________________
Carter, Don't know if you are using Yahoo Mail as I am. I got the same message. My Yahoo mail seems to be having problems, so I suspect it's something on their end that causes this. Rod/w7zrc No, it