I have a Delta II available for sale. The rig was owned by a friend of mine (K6KH, SK) but he never used it, to my knowledge. A few years ago, he shipped it to the factory for reconditioning, which
You can check with Steve VanSickle, WB2HPR. I believe he repairs Ten-Tecs.WB2HPR@arrl.net(518) 461-2354 Ron Fish, KX1W Any suggestions for non-factory repair? I have an Eagle that is deaf as a post.
WB2HPR, Steve VanSickle(518) 561-2354wb2hpr@arrl.net I saw an email for the above with a 518 telephone number but can't seem to find it now. Does anyone remember? Thanks, Greg, WB2BIN _____________
That's all I have. Check his qrz.com listing or email him --Original Message-- From: Greg Yates via TenTec <tentec@contesting.com> To: 'Ron Fish' <ronf404@aol.com>; 'Discussion of Ten-Tec Equipment'
I have a non-functioning Delta II. It was checked out by the factory about 5 years ago and worked fine until the display went dead. I am not inclined to have it fixed by Ten-Tec due to its age. Anyon
At least three folks have contacted me about purchasing the rig. I really don't know what it's worth at this point and I don't want to start a bidding war. The rig powers up but it does not display f
My Delta II display has been defaulting to 15.000 MHz and 1200 UTC every time I power on, although the memories remain intact. Nevertheless, I decided to replace the backup battery. This is the secon
I have a Delta II with a slightly different issue. My RX seems to be fine but on 15m and 17m I have intermittent interference that seems to be generated by the radio. It effectively blanks those two
MFJ makes a series of passthroughs that fit under s standard window do you don't need to drill holes in windows or plexiglass. I use one for my long wire antenna (119' sloped over a 70' tree) which I