Just bought a lightly used blue screen Jupiter. I operate with an indoor dipole at up to 40 watts. With my Kenwood, anything higher than 40W made the transceiver go crazy. I have been using a 'floati
antenna. Certainly an indoor antenna is not the ideal and is far from the better configuration but often our circumstances dictate that as the only choice. The reduction in power to 40 watts seems to
Will do that, then. Do you know of any other mics that sound good with the Jupiter? PM To: tentec@contesting.com Subject: [TenTec] New Jupiter on its Way _ A Few Questions Will ______________________
705 I guess it wouldn't be too difficult to wire up a plug; I'll just have to discover by trial and error what works & what doesn't. Not much of an ssb enthusiast, but everyone likes to have good aud
when consumer Do you think a mag loop would have any gain over the hamstick dipole I use now? I feel I actually put out a halfway decent signal. The problems is hearing anything over that clamor. I'v
spend $3500 for a Merlin titanium bicycle in 1994. Why on earth would you spend so much on this bicycle when a $1200 Cannondale will do the same thing for you, was the typical question I was asked. o
things, model If the return policy is good, it might be worth giving it a trial, if only for the receiving end. _______________________________________________ TenTec mailing list TenTec@contesting.c
Thanks, I'll have a look at it. have _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
ARRL, I would say a magnetic loop, if larger than 0.1 wavelength diameter, might have either the same signal as a loaded dipole, (short dipoles as I imagine you mean), or the magnetic loop will have
order like a ARRL, imagine receive, roof. even inside or The drive I have 15 foot ceilings, so I have a lot of space in which to erect a loop antenna. In fact it would be much less obtrusive than the
same Thanks for saving me the trouble, Rick! Yes, that's all I care about. The dipole gets out surprisingly well. no net. but I build 20- 10M. _______________________________________________ TenTec m
Do these loops require a low noise preamp? I don't think the Jupiter has it's own built in preamp. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lis
K8JHR wrote: I have used the Wellbrook ALA-100M receiving loop for over a decade with good results at two locations. It is a "medium or large aperture" loop, because you supply whatever size wire loo
Rick - DJ0IP / NJ0IP wrote: Then that is very easy. Study the detail pictures of the antenna on that link I sent you. (http://www.dj0ip.de/my-favorite-antennas/old-folks-antenna/ ) It shows close up
Good cite. Here in the U.S., Pixel makes them with all the bells and whistles for about 500., but I'm not interested in them for that reason. I want a receiving antenna that can null out or reject al
Their RF-Pro 1B is very popular with SWLs and hams. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
Yes, it's receive only. I wouldn't trust the switch either, but as a failsafe, it's kind of reassuring. _______________________________________________ TenTec mailing list TenTec@contesting.com http: