Would this Decoder fit the bill? http://www.arraysolutions.com/Products/bandmaster.htm#top of page 73, de Mike, K9UW Amherst, WI Elecraft makes a band decoder called the KRC2. I think it's fairly gen
DXLabs provides the option of UCW or LCW. Go to SpotCollector's Configuration button, select the "General" and look for the "CW Spot" option on the left side of the panel. I'd assume that HRD would o
Tim, are you using the same coax jumper from the tuner to the 930 and the Omni V? If not, perhaps you have a flaky connector. 73, de Mike, K9UW Amherst, WI Well......I have an old TS-930S and it is w
Alpha built a small number of amps for use in commercial and medical research, using the 76A design platform. The front panel was labeled 76A but the literature described it as a "Chemagnetics Power
Here's an elegant solution to the cable management problem, James. You can share your Centurion, microphone, key/keyer, speaker, etc., between the Jupiter, Omni VII and Orion II: http://www.w8zr.net/
And I went from the K9AY loop to the Hi-Z 4 square. While the K9AY put more low band DX in the log than the TX antenna did, I seemed to hit a performance plateau after a year or two. The 4 square fro
Try http://n6ie.com/Ten_Tec_238.html 73, de Mike, K9UW Amherst, WI Here is a link to the web site for the 229/238 tuner mod: www.n6ic.com/Ten_Tec_238.htm Hope this works, if not simply Google TenTec
Hi Bob, I have a paper copy. Are you good in QRZ? I'll just send it to you. 73, de Mike, K9UW _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.co
QST published an article called "Amplifier Care and Maintenance" in September of 2003 and it is available (as a PDF) to members on their web site. The article includes a flow chart for diagnosing pro
I'm using hamqth.com The service is free, although you need to create an account, which is also free. 73, de Mike, K9UW _______________________________________________ TenTec mailing list TenTec@cont
Can you grab it from here, John? http://www.qsl.net/tentec/manuals/234.pdf 73, de Mike, K9UW Amherst, WI I have several Ten Tec stations and one of them is an Omni D transceiver and the Model 234 spe
If your machine DOES come with all that crap on it, I suggest using the "DeCrapifier", available for free (for personal use) at http://pcdecrapifier.com/ [2] . It works well for removing unwanted pro
Sorry, Jim: It has obviously changed since I last used it. It came to me on the recommendation of a local computer store and I used it, successfully, without any of the issues you reported. My sincer
Has anyone else seen this? I received it as an email newsletter from Alpha. 73, de Mike, K9UW ALPHA AMPLIFIERS AND TEN-TEC MERGE UNDER RF CONCEPTS BANNER LONGMONT, Colo.- May 9, 2014 - Announcing tod
I received the same notice from TenTec that I got from RF Concepts/Alpha, but it arrived about an hour later. It appears that TenTec sent the notice to their newsletter subscribers. 73, de Mike, K9UW
*I just got done talking to Paul Clinton and he confirmed my problem, now it's the waiting game, he said 2-3 weeks before they can look it, it's a hardware problem he said.73....Bill / N1ASS.* ______
Sounds familiar, Art. In my case, it was the MULTI encoder. As I understand it, the encoders/switches share a common weak point in the 565, that being the pins and associated sockets behind the front
John, you just added that feature to my Orion III's wish list! 73, de Mike, K9UW Amherst, WI http://k9uw.weebly.com Don't know how many of you really know this, but on the OMNI-VII, it's boot up scre
Are these what you're looking for, Woody? https://www.rfparts.com/rftransistors/transistor-mrfsrfm/rftransistors-mrf-400/mrf472.html https://www.rfparts.com/rftransistors/transistor-mrfsrfm/rftransis
"Entry level" here was an Ameco AC-1T and Knight Kit Star Roamer - that setup gave me lots of incentive to save paper route money for a used HQ-170A and DX-60! The current setup - 565 and 566 with an