Gary, The technology has out run many, including the manufactures. Even in the pickup truck setting in the garage has many computers in it just to make it run.. I think that most today have at least
All this talk of different OSs, I thought that some of you might want to experience a nice Linux interface without installing it on you computer.. Check out this Linux distribution. It's free, and yo
Hi Gary, There are two nets that I know of.. TenTec SDR (Software Defined Radio) Net on 7251 at 3 pm Eastern, Sunday afternoons TenTec Users Net on 14.329 KHz at 4:30 PM Eastern, Sunday afternoons. I
Larry and others, The TT User's Net has been meeting on or about 14.329, Sunday afternoons at 4:30 PM, Tenn. time. We try to listen and discuss TT stuff of any sorts, but frankly 20 Meters is has bee
Just a reminder that the TenTec Users Net will meet at the usual 4:30 PM "Sevierville" time, not by UTC time on 14.329 Mhz. Also I am still running test on http://www.qsonet.com at 14.329 Internet. T
Folks, Due to out of town guests, I will be unable to be net control or QSONET.com with CQ-100 for the Sunday TenTec net.. Hopefully Bruce, or someone else will be able to stand in for me to direct t
Walt, You get what you pay for.. With the Alpha, the quality of parts, and protection circuits are better. While the TT is on the upper range, it's still not the quality of the Alpha, Avcom or even t
The 20 meter net is on 14.329 @ 4:30 PM Eastern time Sundays. Also on the Internet at same time on CQ100 interface @ 14.329 provide through http://www.QSONet.com The 40 meter net is on 7.183 @ 5:30 P
Folks, I am the original owner of a TenTec Jupiter that I have had for about 4 years without any troubles. Non-smoker, non-autotuner, very clean with box, manual, accessory kit, and microphone. Will
For folks interested and have the time, you are welcome to join the TenTec Users Net on or about 14.329 Mhz at 4:30 Eastern or 2130 UTC. Just some interesting folks checking in from all over the coun
Due to poor band conditions, the 40 meter net has been temporaily suspended. 73, Dudley WA5QPZ _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.c
Folks, I am about over the flu and should be at my post on the TT Net Sunday at 4:30 PM on 14.329. Just too sick to turn the switch on the Omni VII . So look for the Net Sunday, same time, same chann
Mike, I have not seen that on my OmniVII.. 73, Dudley WA5QPZ -- 73, Dudley WA5QPZ _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com
Mike, Of course there are those radios without knobs, so it doesn't matter. 73, Dudley WA5QPZ -- 73, Dudley WA5QPZ _______________________________________________ TenTec mailing list TenTec@contestin
Kim, If it is not already gone, I'll send you a label for pickup.. Thanks, Dudley WA5QPZ -- 73, Dudley WA5QPZ _______________________________________________ TenTec mailing list TenTec@contesting.com
All this discussion of bandscopes, the Flex has the best and most detailed, and the main and 2nd are fullly detailed in the same screen with Point and shoot.. Now if TT could duplicate that detail...
Bill, You have a ground loop to the laptop.. I bet that you will lose the hum if you break the ground from the radio to/from the laptop sound card.. Better isolation from the radio to the sound card.
Jim, Could be, but not in all occasions.. Example, the Jupiter's audio output is isolated ground, audio ground is not chassis ground, therefore you can not bond the audio ground to chassis ground, is
Wilbert, Carl's, N4PY software does a much better job of running the Omni VII. Then there is also the One Plug from TT to operate the radio either via the local ethernet or over the Internet. But to
Ken and others, Having phased locked VFOs is very handy, but the QST article on the K3 was a little miss leading, there are other radios with phased locked identical receivers, such as the Flex 5000.