So far, the 566 V3 firmware has been a huge success. Of course, I did expect that the broader group would find something that we missed. We have resolved the current HW Mic gain issue seen in the Ori
As in the 566, the 565v3.025 firmware has also been a huge success. We are looking at the main issues that users have reported, and have been able to reproduce most of them. Various screen gibberish
Ray, I appreciate your patience. and encouragement. It takes a team, not just me, the developer is working on the 565 today, and the beta testers have not stopped working on this for over 6 mos now,
Hello Darrell, The two receivers are on the same frequency, using the same LO and master reference. The little tweak feature is to get the 2nd LO on the 366 in the right place. The phase is not going
Hello Mike, If you look at the picture on the website with the labels showing cable 4, 5, 6, 13; or picture T in the manual, you might notice a TMP connector that is right next to the left post holdi
Have had a few requests for status on the 539 and the 418. Regarding the 539: (the new HF QRP rig) We have ordered and are building what we think will be representative of the final production boards
Just to let everyone know, the RX366 has been such a hot item, it is now sold out of it's first production run. -- == John Henry, KI4JPL Phone: 865-453-7172 x234 Engineering Direct: 865-868-4915 TenT
The reason for this posting is for two reasons. 1 - To inform people of the progress of the V3 firmware. Current Status: Over the last two weeks I have received several emails and have seen postings
Improvements include: Version V3.028 Serial port fix resolving some invalid responses to computer queries Fixed CW Sidetone Frequency after Transmit on FSK issue Fixed PBT display issue when recallin
Improvements include: Version V3.030 Corrected mishandling of DUAL/DIV with 366 installed Changed FSK to default to MARK HIGH Fixed CW vs. FSK sidetone issue Removed RX366 filter selection if not ins
I sent Rick an email on how to do this. Basically cable #2 on the rear panel board is a place to tap the main antenna on the receive path only, and cable #1 on the rear panel is a place to tap the th
Barry, Reviewing the two schematics for both, and looking at the two models A0 boards for the cable connector numbers and the jumper numbers. They are the same. I do believe that there are difference
Just posted a firmware update for the Eagle at the TenTec website. http://www.tentec.com/pages/Transceiver-Downloads.html Scroll down to the 599 section, and V1.819 is in the right column. Download i
Just posted a firmware update for the Orion II Model 566 at the TenTec website. http://www.tentec.com/pages/Transceiver-Downloads.html Scroll down to the 566 section, and Ver3.029 is in the right col
Just posted a firmware update for the Orion Model 565 at the TenTec website. http://www.tentec.com/pages/Transceiver-Downloads.html Scroll down to the 565 section, and Ver3.032 is in the right column
Just posted a firmware update for the Eagle at the TenTec website. http://www.tentec.com/pages/Transceiver-Downloads.html Scroll down to the 599 section, and V1.823 is in the right column. Download i
I believe that this came in on firmware version 2.064x11 If you have at least that version, it should work. Press Menu Press RX Press PWR If you are running a V2 code prior to 2.064x11 or V1 code, th
Just posted a firmware update for the Eagle at the TenTec website. http://www.tentec.com/pages/Transceiver-Downloads.html Scroll down to the 599 section, and V1.824 is in the right column. Download i
For those of you that are waiting on the CommCat Mobile 2 release to control TenTec and other rigs via your iPhone/iPads/iDevices. It is now released and available on iTunes. This received quite a bi
Just posted a firmware update for the Eagle at the TenTec website. http://www.tentec.com/pages/Transceiver-Downloads.html Scroll down to the 599 section, and V1.825 is in the right column. Download i