Hi John! My 82 year old aunt in Louisiana has a Laser Jet 5 printer. She would love to have it. Her address is: Dorothy Siegel 2418 Vista Drive Opelousas LA 70570 I have a LaserJet 4, 4 Plus, 4 M, 4
John; It sounds like your ground wire is a bit too long. I think MFJ makes a ground wire turner that might help reduce your problem. I had a 1 watt 2 meter rig that would trip off the GFCI from the o
I picked up a powered speaker to use on mine. I bought a discontinued KRK V4 series II speaker from Guitar Center. The sold me one for a hundred bucks. The speaker had the center cone pushed in by so
I am thinking about buying either the 8 channel EQ or the EQ Plus by W2IHY. What is recommended? _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists
Sounds like if I want to ad a bit of a punch to my audio with a Omni Six Plus would be to add a Titan instead of a W2ihy device. Thanks for all of the info guys. Gary, WB5VBB --Original Message-- Fro
Looking for a Ten Tec tuner to match Omni VI plus. Which one is recommended? I don't currently run an amplifier. I use a Carolina Windom antenna, so I do need a tuner and like building wire antennas.
I have had some weird problems with metering on other radios. Try a longer piece of coax and hook it right to dummy load without meter to see what happens. Gary --Original Message-- From: tentec-boun
A few years ago a friend had a Corsair 1 or 2 and had some loose connections on a plug in circuit board. I would check for any board that plugs in and clean the contacts with deoxit cleaner and hit e
I cook competition barbeque and will be cooking this weekend in Sevierville, TN. Any Ten Tec folks that want to stop by for a bite are welcome. Will be in Young Harris GA next week. We will be cookin
Check for plugs that might be plugged in, but not aligned properly. Check for pins that might have pushed out when connectors were plugged in. Also check the other end of the cables to make certain t
Hi Aaron! Is the transmitter hooked up? Could you be getting RF into it? Hit the dit or dah and then uplug the key to see if it stops. Take care _______________________________________________ TenTec
Turn it on and leave it on overnight. You might have some leaky capacitors. I have done this before on equipment that has been set up for a while and things started to work OK. Take care I fiddled ar
Hi can you send pictures and size information. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
Mint Corsair II with filters, no scratches, clear display, new PTO installed by Ten Tec. With Power supply and VFO. Front clean on both power supply and VFO, VFO has scratches from power supply screw
Corsair II comes with 1800 and 500 Hz filters. Mint Corsair II with filters, no scratches, clear display, new PTO installed by Ten Tec. With Power supply and VFO. Front clean on both power supply and
N1mhc@arrl.net == Did the 227 tuner have a balun in it to tune open wire? If so was it big enough so it did not heat with 100w? Thanks 73 Paul K9OT _______________________________________________ Ten
Hi John I have been looking at Ridgeline as well. Local dealer giving me 3500 under invoice for a new one. K0BG runs mobile with ridgeline. Has a bunch of info on his site. www.K0BG Lists a specific
I think it is the battery used for cigarette lighters and car alarms. Or possibly a N cell. They have them at radio shack hello . do you know what volts are on the m+2/u i have one really good shape.
Test just delete _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec ________________________________________