- 1. Re: [TenTec] 546c advice (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Wed, 17 Sep 2008 07:26:10 -0500
- Verne: There were three series of the original Omni radios. The first series was simply called the Omni, until the Omni series B came out, then the original Omni became known as the Omni series A. Th
- /archives//html/TenTec/2008-09/msg00215.html (11,266 bytes)
- 2. Re: [TenTec] Omni D Model C Power Cable Plug... (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Mon, 28 Apr 2008 06:14:18 -0500
- Jim: I have not bought one in some time, but Ten Tec used to sell them. "73" Dub Any help appreciated... Jim WV5K _______________________________________________ TenTec mailing list TenTec@contesting
- /archives//html/TenTec/2008-04/msg00494.html (8,040 bytes)
- 3. Re: [TenTec] Allen Wrench size for knobs on Omni D (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Sun, 13 Jan 2008 11:15:52 -0600
- Ivin: The allen wrench size is .050". I have also used a 1.3mm, which is .052". The main concern is to get a good quality allen wrench, as the El Cheapo imported wrench's, such as Harbor Freight, etc
- /archives//html/TenTec/2008-01/msg00275.html (9,645 bytes)
- 4. [TenTec] FOR SALE: Ten Tec 238 Tuner (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Thu, 04 Oct 2007 09:38:08 -0500
- Excellent condition, inside and out, with one very small exception. The thin inner web of the antenna selection knob was split, probably by over tightening the set screw, which is a fairly common occ
- /archives//html/TenTec/2007-10/msg00156.html (7,602 bytes)
- 5. [TenTec] Re FOR SALE: Ten Tec 238 Tuner (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Fri, 05 Oct 2007 16:01:46 -0500
- Tuner is spoken for. Thanks! "73" Dub Excellent condition, inside and out, with one very small exception. The thin inner web of the antenna selection knob was split, probably by over tightening the s
- /archives//html/TenTec/2007-10/msg00170.html (7,554 bytes)
- 6. Re: [TenTec] OMNI VI 9MHZ filters (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Wed, 24 Oct 2007 08:25:44 -0500
- Paul: As Clarke advised, pay very close attention to the adjustment of the PBT. A tiny bit off in this adjustment can make a big dif in the apparent attenuation of the 250hz filter. "73" Dub Do other
- /archives//html/TenTec/2007-10/msg00450.html (8,635 bytes)
- 7. [TenTec] FS Ten Tec 288 filter: (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Wed, 25 Jul 2007 14:24:57 -0500
- Omni V, & Omni VI. $70.00 shipped priority mail to lower 48. Thanks... "73" Dub -- J. W. (Dub) Thornton K5DUB Minco, OK.
- /archives//html/TenTec/2007-07/msg00323.html (6,957 bytes)
- 8. Re: [TenTec] CW on Corsair II (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Sun, 01 Apr 2007 07:46:01 -0500
- Paul: Good info from Gary. Just a coupla more notes. If you plan to use the internal keyer and an external keyer/key at the same time, you can go inside and solder a wire between the Keyer Out & Key
- /archives//html/TenTec/2007-04/msg00000.html (10,666 bytes)
- 9. Re: [TenTec] weasels (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Fri, 16 Mar 2007 05:33:33 -0500
- Hey Doc: You are keeping too late hours. heh heh... "73" Dub If you happen to receive this note, could you please write me directly? I seem to have lost your e-mail address. If anyone else knows Alla
- /archives//html/TenTec/2007-03/msg00404.html (8,017 bytes)
- 10. Re: [TenTec] Inrad Argosy question (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Sat, 17 Feb 2007 07:58:51 -0600
- Pete: I have not actually tried it in my Argosy, but feel sure it would work fine. I have used this filter in the old Omni B series, and currently use it in the Omni C. My impression is that the skir
- /archives//html/TenTec/2007-02/msg00260.html (8,478 bytes)
- 11. Re: [TenTec] Corsair II question (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Sun, 19 Nov 2006 06:42:00 -0600
- Vince: The Corsair II came from the factory with a one piece jumper (with two RCA plugs) that plugged into the key & keyer out jacks, to short them together, which is necessary to operate in CW mode.
- /archives//html/TenTec/2006-11/msg00247.html (10,535 bytes)
- 12. Re: [TenTec] Scout modules (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Thu, 13 Oct 2005 07:35:59 -0500
- Hi Jim: That would be me! I also sent you a personal email a few minutes ago, with the info you need. I also still have two 40 meter modules for sale, and a 20 meter module that has been offered to J
- /archives//html/TenTec/2005-10/msg00250.html (8,159 bytes)
- 13. Re: [TenTec] T-T 555 Scout (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Thu, 13 Oct 2005 07:45:03 -0500
- Jim: We will get this module thingee ironed out, I betcha. I was so certain I had sold all the 20 meter modules, that I just did not check it. I know better than to rely on my memory for anything. I
- /archives//html/TenTec/2005-10/msg00251.html (8,613 bytes)
- 14. [TenTec] Noise Blanker for Scout: (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Sun, 11 Sep 2005 07:44:41 -0500
- I know its a longshot, but am still looking??? "73" Dub -- J. W. (Dub) Thornton K5DUB Minco, OK.
- /archives//html/TenTec/2005-09/msg00145.html (7,183 bytes)
- 15. Re: [TenTec] Noise Blanker for Scout: (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Mon, 12 Sep 2005 09:35:59 -0500
- Hi Stuart: I see them frequently there, but always in a Scout. This is my second "Request" for a noise blanker, so if no results, I will start looking for a Scout WITH a noise blanker, & sell mine, o
- /archives//html/TenTec/2005-09/msg00180.html (7,866 bytes)
- 16. [TenTec] Wanted: Noiseblanker for Scout. (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Sat, 06 Aug 2005 06:58:29 -0500
- Anybody have one for sale?? Thanks, Dub -- J. W. (Dub) Thornton K5DUB Minco, OK.
- /archives//html/TenTec/2005-08/msg00112.html (6,956 bytes)
- 17. [TenTec] Switching relay for balanced line: (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Sat, 06 Aug 2005 17:13:11 -0500
- A few days ago, someone posted that he used a relay for switching balanced feedlines. I thought I had saved the msg, but alas, its nowhere to be found. Any help please? "73" Dub -- J. W. (Dub) Thornt
- /archives//html/TenTec/2005-08/msg00128.html (7,543 bytes)
- 18. Re: [TenTec] Switching relay for balanced line: (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Sun, 07 Aug 2005 13:33:50 -0500
- Tommy/Troy: Thanks for the reply/info. I have used a 80M horiz loop, fed with HB open wire feedline, thru the wall, into the shack, for 10/12 years. I do not even OWN more than 100 watts, & this setu
- /archives//html/TenTec/2005-08/msg00167.html (9,087 bytes)
- 19. Re: [TenTec] Corsair II (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Sun, 06 Mar 2005 07:16:08 -0600
- Jim: If you are on the Oscillator-Mixer board, there is indeed a typo (in my manual). Paragraph 3, page 3-7, I set the bandswitch to 14 mhz & adjusted R-29 to set display to 14.0000. A drop of De-Oxi
- /archives//html/TenTec/2005-03/msg00182.html (8,705 bytes)
- 20. Re: [TenTec] 263 Remote VFO PTO (score: 1)
- Author: "J. W. (Dub) Thornton" <dub@oklahoma.net>
- Date: Sat, 26 Feb 2005 15:39:40 -0600
- Haney: Get a GOOD QUALITY (not Harbor Freight, etc.) Allen, or Hex wrench of either Metric 1.3mm, or American .050" size for the screw holding the main tuning knob on most of the older Ten Tec rigs.
- /archives//html/TenTec/2005-02/msg00756.html (9,049 bytes)
This search system is powered by
Namazu