A Ten Tec Limited Edition Vibroplex Imbic Paddle just came up for sale in ARRL Classifieds 73, Paul _______________________________________________ TenTec mailing list TenTec@contesting.com http://li
Larry, I found it very convenient to have one computer dedicated to ham radio. I shopped online and found a small desktop profile (not standing "tower") compaq with a 300MHz Pentium III with about 12
The SGC-2020ADSP runs 3.5 amps @20Watts so you might be able to dial it back. It is not the best in anything - though the DSP sure quiet's the noise level down - but seems to be good enough for a por
From time to time the display on my Paragon II goes blank (I think the VFO A light is still on). At that time, the audio still works - I can still hear the station I was listening to - but the tuning
Anyone have experience with the RX-340 compared to the RX in the Orion with ability to pull the weak ones out, scan for activity, etc. Thanks and 73, Paul ____________________________________________
I did search the archives but found nothing current about the Pegasus compared to Flex-Radio SDR-1000. Now that the Pegasus has been discontinued, is SDR-1000 the only "living" game in town for SDR?
Randy, I was once standing were you are rig/computer-wise. You didn't mention what Mac you have so I don't know if it has a serial port - they dropped those a while back in favor of USB. You could ge
You might check with a local library or museum and see if someone there has suggestions. I'm guessing they have some experience with long term paper storage. 73, Paul ________________________________
It might work, it might be junk, but the MFJ-1703 switches two antennas to two rigs. So the Ten Tec is on the Dipole and the Elecraft is on the Vertical. Throw the switch (manual) and the Ten Tec is
Vic, Does your 200 Hz offset issue mean you run split or do you cover it with RIT? 73, Paul _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.cont
When you throw that big DPDT switch, do you get to rub your hands together and proclaim, "It's Alive! It's ALIVE!!" 73, Paul _______________________________________________ TenTec mailing list TenTec
You might try the free Commander software as part of the DXLab suite of programs. There are a few reflectors so just put DXLab in google and look around. Also, for a fee, I believe N4PY has rig contr
Ten Tec'ers- sorry if this is too long. I almost answered direct, but maybe there is someone else out there just ready to try - or at least watch - these digital modes. Ten Tec gear is so great for t
I'll sell my factory assembled Idiom Press CMOS4 for $90 shipped to lower 48. It works just fine, but I've given up on iambic and will build a kit that supports ultimatic mode once I sell the CMOS4 a
I've been waiting and watching the classifieds lists and missed one by about 10 minutes. So thought I'd inquire here. Anyone have a model 263 (prefer G) VFO that works with Corsair II that they'd lik
Duane, I've been thinking of such a remote idea with the Pegasus. But how do you reconcile the FCC "control of remote enquipment" sections. I though control channels had to be on 440Mhz? Is remote co
Ron, So you're the one :) There I was with my little 17W Argo V trying to work this guy in Sweden and all the big guns are masking my signal - 1KW, 700W, 500W minimum, big compression, etc. Finally,
You might consider and old Ten Tec rig if most repairs will be done by you. Any Issue will have already been known, there would be a ready supply of used parts, etc. something like a Paragon or an Om
Yes, a set of headphones for the xyl to enhance the sound. And get the wireless style so she can move about and not miss the dialog in the TV program - like if she has to visit the power room or get
InRad's catalog shows filters for the Paragon (Original) and Corsair II. And Ten Tec shows filters for the Corsair II that also work in the Paragon II. If the Ten Tec filters work in both, and Inrad