Weird - I owned my VI+ for seven years, and it never did this once. So, here's the existence theorem for others that don't have the problem! 73, Duane Duane Calvin, AC5AA Austin, Texas www.ac5aa.com
Logbook of the World is free if you're an ARRL member. Unlike eQSL, it is good for DXCC and other awards. 73, Duane Duane Calvin, AC5AA Austin, Texas www.ac5aa.com I know this is off the topic of equ
Mine is running about 25%. Still, it could be a lot better. 73, Duane Duane Calvin, AC5AA Austin, Texas www.ac5aa.com --Original Message-- From: tentec-bounces@contesting.com [mailto:tentec-bounces@c
Sorry - that's what distinguishes LotW from eQSL. The cert process is what assures that it is you who appended your data. That's what drove part of the high cost to develop it. This makes it nearly
OK, I stand corrected - several times! Sorry for the misinformation. 73, Duane Duane Calvin, AC5AA Austin, Texas www.ac5aa.com Logbook of the World is free period. You don't have to be an ARRL member
John, If the suggested fixes don't work, it might pay to estimate the length of the wire running from the box to your GCFI breaker. There is a max recommended length on a span with one of these break
Reverse phone number check on yellowpages.com didn't give an answer, but they do say they're in the Midwest. How about emailing them and asking, if you're curious? 73, Duane Duane Calvin, AC5AA Austi
Michael, I have no problem driving my Alpha 99 to full output easily - same output from the Orion I as you report from your Pro II. Not sure what the ameritron unit is, but I hope you don't have a tu
In what rig? I used one in my Omni VI+ and it worked FB. Ganged it with the 500 Hz in the 2nd IF and shifted the passband on that one, and it was a potent combination on RTTY. 73, Duane Duane Calvin,
N1 and N2, if I remember correctly, are for selecting first IF (9 MHz) filters. The passband tuning works on the 2nd IF (6.3 MHz). 73, Duane Duane Calvin, AC5AA Austin, Texas www.ac5aa.com __________
Bob, I installed digiKeyer (on an Orion I) last year after Dayton, and it is still playing well. I use it with WriteLog, DX4WIN, and used WinWarbler to set it up. If you get stuck, be sure to email J
I don't know if others are noticing this too, but the audio output of the Orion's 8-pin DIN rear connector seems to be down quite a bit from the last version of the FW. On my DigiKeyer, I have to run
Neal, I must be missing something - where is the menu item for output audio level? (I must be having a "doh!" moment!) 73, Duane Duane Calvin, AC5AA Austin, Texas www.ac5aa.com Did you check the menu
Barry, You may be right - I'm not sure I loaded the last version due to some of the problems noted. I found that the input level was significantly different for PSK levels (I was set on "4" and had t
Not on my menus at all. The last line of the 'Other' menu is "Remote Pod Enc". You must be running an Orion II? 73, Duane Duane Calvin, AC5AA Austin, Texas www.ac5aa.com --Original Message-- From: te
Just FYI - the Orion will not update running through a microHam DigiKeyer that connects to the computer through a USB port. It stalls out early in the FW write process. I have to use a hard COM port
Thanks for the clarification, Grant. I wasn't complaining - both TT and microHam recommend against using these interfaces (not the USB/COM port adapters) to do updates. I suspect it has to do with ot
Thanks, Cedric. Next time I'll try it again. I had all other applications shut down, so I'm not sure why it didn't work.. I have an Orion I, not a II, so that may have something to do with it. 73, Du
Nope, it's a bug! Even Lincoln would have agreed. 73, Duane Duane Calvin, AC5AA Austin, Texas www.ac5aa.com --Original Message-- From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.