Mail Archive Search: <+from:ac5aa@juno.com>

Results:

References: [ +from:ac5aa@juno.com: 606 ]

Total 606 documents matching your query.

161. [TenTec] RE: OMNI VI Connector 52 + other... (score: 1): Author: ac5aa@juno.com (ac5aa@juno.com); Date: Sat, 20 Mar 1999 13:01:34 -0600; I think I've figured out the disparity in observations of (1) clicks on the sidetone, and (2) volume control setting. I tend to run the DSP all the time the rig is on. This is an old habit from when; /archives//html/TenTec/1999-03/msg00236.html (8,509 bytes)
162. [TenTec] RTTY (score: 1): Author: ac5aa@juno.com (ac5aa@juno.com); Date: Tue, 23 Mar 1999 22:07:41 -0600; I run RTTY (FSK) with my Omni VI+ and it does great. I prefer FSK because I don't have to horse around with disconnecting either the RTTY or microphone when in the other mode. It works great for me w; /archives//html/TenTec/1999-03/msg00283.html (9,641 bytes)
163. [TenTec] TenTec Centurion Load Control (score: 1): Author: ac5aa@juno.com (ac5aa@juno.com); Date: Mon, 22 Feb 1999 22:37:46 -0600; The table in the manual shows "nominal" tuning for the low end of 160, 80, 40, and 30 meters being "9" on the Load control. On 15m it's "5". Looks like your tunings aren't very far off what is consid; /archives//html/TenTec/1999-02/msg00257.html (8,412 bytes)
164. [TenTec] On Contact Cleaning (score: 1): Author: ac5aa@juno.com (ac5aa@juno.com); Date: Wed, 24 Feb 1999 23:01:56 -0600; DeoxIT - by far the favorite of the very picky boatanchor restoration experts. Great stuff. One vial of it lasts forever because you use so little of it. 73, Duane AC5AA (don't know how it smells :^); /archives//html/TenTec/1999-02/msg00296.html (8,286 bytes)
165. [TenTec] DeoxIt (score: 1): Author: ac5aa@juno.com (ac5aa@juno.com); Date: Thu, 25 Feb 1999 20:02:36 -0600; I've gotten a few requests about where to obtain DeoxIt. I was told MCM Electronics carries it, but their web site does not have a catalog online. YOu can order one from there, and the URL is: http:/; /archives//html/TenTec/1999-02/msg00300.html (7,689 bytes)
166. [TenTec] SKN (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Fri, 1 Jan 1999 13:43:37 -0600; Last night was my first SKN in at least 20 years, and probably the first time I've spent more than a couple minutes using a hand key in that time. Boy, was my fist bad! Reminds me of the last time I; /archives//html/TenTec/1999-01/msg00013.html (8,921 bytes)
167. [TenTec] Alternate PS for Omni VI? (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Wed, 13 Jan 1999 19:17:48 -0600; I power my Omni VI+ with an Astron RS-35M purchased used at a swapfest for what an RS-20 would cost new. Works great - no problems here. And it's on the floor, not taking up room on the operating tab; /archives//html/TenTec/1999-01/msg00289.html (9,819 bytes)
168. [TenTec] Alternate PS for Omni VI? (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Wed, 13 Jan 1999 20:57:29 -0600; Yes, let me amplify what Chris said: If you don't use a TenTec power supply, BE SURE TO FUSE THE LINE GOING TO THE OMNI!!! TT fuses/protects the power supply, not the rig (wrong choice, in my opinion; /archives//html/TenTec/1999-01/msg00294.html (10,498 bytes)
169. [TenTec] Omni 6+ TX in/out jumper (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Sun, 17 Jan 1999 00:29:46 -0600; Yes, you are doing something wrong. The amp does not need to be on, but you need to switch the switch in the lower right hand corner (can't remember what it's called) -- Standby/Operate (?). It must; /archives//html/TenTec/1999-01/msg00363.html (8,608 bytes)
170. [TenTec] Centaur and Omni 6+ revisited (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Mon, 18 Jan 1999 22:30:12 -0600; Rob, As I mentioned in my previous note, the mini-toggle switches they use on the Centaur really don't stand up very well. One key I found is to make sure you don't put any sideways pressure on the s; /archives//html/TenTec/1999-01/msg00387.html (7,998 bytes)
171. [TenTec] OMNI-6+ audio gain control (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Sat, 23 Jan 1999 18:46:54 -0600; I agree - and to make it worse, the pot tends to get "scratchy" faster than you'd expect. I wonder if it's a linear instead of audio taper, or just not the optimum value. 73, Duane On Sat, 23 Jan 199; /archives//html/TenTec/1999-01/msg00457.html (8,796 bytes)
172. [TenTec] Heil/Omni VI Plus (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Sun, 24 Jan 1999 18:56:45 -0600; I run the same ProSet / HC-5 with my Omni-VI+ and it works fine. The Heil elements require a little more gain than others. I have my Mic gain set at 1 o'clock, and the processor is also at 1 o'clock.; /archives//html/TenTec/1999-01/msg00491.html (7,119 bytes)
173. [TenTec] Centurion amp (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Sun, 31 Jan 1999 00:23:18 -0600; George, I have a Centurion that is about a year old. It's a terrific amp - quiet, smooth, tunes nicely, and does a great job for me. I've used it on full-QSK CW, RTTY and SSB with no problems and gre; /archives//html/TenTec/1999-01/msg00619.html (7,446 bytes)
174. [TenTec] Ten Tec Cure for Clicking Omni 6 a No Go (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Sun, 22 Nov 1998 11:29:21 -0600; I have a suspicion that not all Omni VI+'s have this problem. I'm usually annoyed by this kind of thing (and traded my Centaur on a Centurion due to noise). But I don't hear a "click" on the sidetone; /archives//html/TenTec/1998-11/msg00256.html (11,586 bytes)
175. [TenTec] You "no clickers" (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Sun, 22 Nov 1998 22:37:29 EST; Yes, no click. Fast QSK to at least 35wpm, headphones only on CW, external Logikey K1 keyer, yada, yada, yada... 73, Duane Duane Calvin, AC5AA Austin, TX ac5aa@juno.com -- FAQ on WWW: http://www.cont; /archives//html/TenTec/1998-11/msg00284.html (7,869 bytes)
176. [TenTec] Zero Beat (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Thu, 22 Oct 1998 21:39:49 -0500; Sometimes being off frequency is intentional, not accidental. If I'm chasing a DX station and the stations he's working are offset from his frequency, say, 100-200 Hz (this is common), then I'm going; /archives//html/TenTec/1998-10/msg00235.html (8,527 bytes)
177. [TenTec] Ten Tec Cure for Clicking Omni 6 a No Go (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Mon, 26 Oct 1998 23:19:30 -0600; I don't think the 2.8 kHz filter addresses clicks. I think it addresses the slight "chirp" (not the right definition, but what we've called it on the reflector) that some Omni-VI's seem to demonstrat; /archives//html/TenTec/1998-10/msg00259.html (9,008 bytes)
178. [TenTec] Contesting and the OMNI-VI+ (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Sat, 5 Sep 1998 19:10:54 -0500; The comment about RIT, etc., is that you cannot reset controls while in transmit. I don't like it either, but I put up with it since I like so much else about the rig. You also can't switch quickly t; /archives//html/TenTec/1998-09/msg00074.html (9,170 bytes)
179. [TenTec] Contesting and the OMNI-VI+ (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Sun, 6 Sep 1998 00:27:31 -0500; Yes, I was describing the Omni-VI+. But in order to clear the RIT/XIT, you can't just punch the clear button or the RIT and expect them to work. Try it. Key the rig on CW and try to turn off RIT or X; /archives//html/TenTec/1998-09/msg00081.html (9,903 bytes)
180. [TenTec] Omni Body Temperature? (score: 1): Author: ac5aa@juno.com (Duane A. Calvin); Date: Thu, 24 Sep 1998 22:11:48 -0500; I think I'd rather have a "warm" rig than one filled with dust. Check out your PC sometime and see what that fan does for it (although it has reason to need a fan). I doubt the Omni needs the cooling; /archives//html/TenTec/1998-09/msg00431.html (10,295 bytes)

Current List: 161 - 180
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20]