This is the 9 MHz filter, 500 Hz wide. Send email or call me at 903-878-2935. Tnx es 73 de John, WA5TWL aka W5OT _______________________________________________ TenTec mailing list TenTec@contesting.
I use the a ten amp breaker for the Argosy 2D which is in series with a ten amp fuse. The breaker has tripped several times. The fuse has not blown. John, WA5TWL CATFISHTWO@aol.com wrote on 6/18/2006
I have used all three radios, and own an Omni VI and a Pro. For your operating preferences, I recommend the Omni VI. It is the best for CW, hands down. It is also the lowest priced. 73 de John, WA5TW
Talk to Ten Tec service. It may be the bias has changed on the tubes due to component failure. I doubt that the 3-500's are the problem. tnx es 73 de John, WA5TWL "When CW is no longer a requirement,
Please let me know if you have a surplus 500 Hz Model 285 CW filter. I will buy it or trade a Model 218 1.8 KHz (9 MHz IF) for it. Reply to WA5TWL@aol.com. tnx es 73 de John, WA5TWL _________________
My venerable Omni VI, Option 1 is for sale. It is a 9 out of 10 externally - no scratches or abrasions; and a 10 out of 10 functionally. All filter slots are populated. The 9 MHz "narrow" slot has a
forgot to include my contact info: k5see@arrl.org or w5ot@aol.com 281-770-5171 _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/ma
Tuner is 9-9.5 cosmetically and a 10 functionally. Manual included. I will ship it in the lower 48 for $275 for money order. Price using Paypal is $285. 73 de John, K5SEE 281-866-8607 _______________
Please contact me at : john@k5see.com ** See what's free at http://www.aol.com. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/m
I have a remote encoder which functions like the 301 to change frequency on the Omni six series transceivers. It has a connection to allow control of the rig thru a serial port and remotely tune the
I agree with Joe.? See below.? I had an Omni V, traded it for an Omni VI.? Bought a Paragon 2, soon sold the Omni VI, as I no longer contest competitively.? Really like the Paragon 2 for its clear re
Amplifier is being sent to TenTec for repair/refurbishment. It gave up the ghost last night after years of faithful service. The Centaur will be shipped to the successful purchaser direct from the fa
I would appreciate advice from anyone who has rigged a circuit to allow the Argosy II to key an external amplifier. Thanks and 73 de John, K5SEE **Wondering what's for Dinner Tonight? Get new twists
Joe, would you be interested in a mint , like new Icom 756 Pro plus $800. I am the original owner, a non-smoker, etc. in trade for the Omni VII w/roofing filter. If so, call me at 281-770-5171 and we
What is the expected price for an Orion I in good shape with a roofing filter, fan, and internal tuner? tnx es 73 de John, K5SEE **A Good Credit Score is 700 or Above. See yours in just 2 easy steps!
Are you ready to move up to one of the fantastic new rigs? If you want to sell your Omni VI, please let me know the price and description. Thank you. REPLY TO: _john@k5see.com_ (mailto:john@k5see.com
My Omni VI has a small bit of carrier showing on LSB that is not present on USB. Also there is a full output switching transient when I key the mike in LSB; it is less than half on USB. Can this alig
My receiver emits a wind tunnel like rushing sound and tone on all frequencies when rf gain is at or near max.? it just started doing this after working flawlessly.? any suggestions would be apprecia
Yes, the problem only occurs near the rf gain maximum. Whenever I get anything odd, I reboot the rig and do a refresh of the software, Didja try that? What happens if you lower RF gain? Does it act r
Paragon 2 model 586, serial # 10A10124 like new, with manual, hand mike, and 6, 2.4, and .5 filters $850. 961 power supply, very nice $150. Package price is $925.? All plus shipping to lower 48. John