I do not understand why the ARRL did not address the issue of propagated BPL interference. Abatement and remediation are impossible if the unidentified signal is coming from "who knows where?" Why do
Inference is not strong enough. Clearly, we are talking to people who don't understand radio. The discussion is bogged down in point vs. line source and 20db vs 40db attenuation at x feet from the wi
Repliers - Keep it on list. This stuff is valuable to others and establishing an archive will keep us from having to go through this drill every other day. Just my Humble Opinion Radio k4ia Craig "Bu
Maybe I misunderstand but perhaps the gurus here can straighten this out. The Dynamic Range numbers relate to how strong a nearby signal will produce IMD distortion. That is the mixing of two signals
In a message dated 5/20/2004 22:44:06 PM Eastern Daylight Time, w4tje@mindspring.com writes: when qrm comes on above my freq. I tighten up the high cut filter, and then push the knob, holding it down
I had Norton AV running. I had some problems I don't think were AV related. First, the install said it could not communicate with my radio. I had been running a logging program with rig control but t
There are calibrations around the knobs The inductor knob is vernier. I find it very easy to repeat settings on the tuner. A little tweak is all it might need and often not even that. Radio k4ia "Buc
Question really is: "Does a double paddle have to be used in iambic mode?" No. I use a double paddle but not in iambic mode. I cannot master the squeeze technique either. I had used a bug so I was ac
Three choices: March Magnetic Profi Spring Begali Magnetic The Profi and the Begali feel very similar even though they have different actions. I don't think you will be able to tell the difference be
I too have noticed sweep lockups. I don't use the sweep all the time, in fact rarely, but whenever I do it will lockup if the rig has been on for a few hours. I also notice the sub-receiver audio sto
I would comment on the click issue but my sweep is frozen most of the time so I don't know if it "clicks" or not. ;-) Has no one else experienced freezing sweep accompanied by loss of audio in the su
Dick I had a problem with getting sound out of Writelog because the output from my computer was on one channel of the stereo and when I plugged in a mono connector, it just happened to pick up the "o
I had everything set up all nice and pretty with my Yaesu Field but I am now trying to set up the Orion. I get a constant key down when I key the on the DTR line (which I am using to key the CW). It