Mail Archive Search: <+from:DAVEK2DP@aol.com>

Results:

References: [ +from:DAVEK2DP@aol.com: 9 ]

Total 9 documents matching your query.

1. [TenTec] INRAD Filters (score: 1): Author: DAVEK2DP@aol.com (DAVEK2DP@aol.com); Date: Fri, 25 Oct 2002 23:27:15 EDT; OM, The INRAD filters (2.4 and 2.8) made a significant improvement in the audio quality of the received SSB signal on my OMNI 6 Plus. Add the little audio mod they also sell and you have a great cros; /archives//html/TenTec/2002-10/msg00530.html (6,656 bytes)
2. [TenTec] Omni Audio (score: 1): Author: DAVEK2DP@aol.com (DAVEK2DP@aol.com); Date: Fri, 23 Aug 2002 22:55:47 EDT; Bob, I'm not sure what the specs are for the OMNI 6+, but once you install the INRAD SSB filters and make the INRAD audio mod, it will be superior to a stock OMNI 6+. HOwever, it will never sound lik; /archives//html/TenTec/2002-08/msg00404.html (6,398 bytes)
3. [TenTec] Fwd: Microphone for Omni VI - Use of D-104 (score: 1): Author: DAVEK2DP@aol.com (DAVEK2DP@aol.com); Date: Wed, 10 Jul 2002 22:24:16 EDT; OM's, I have used a standard, stock, non-amplified D-104 with my OMNI 6 /6+ for the past 3 years with no problems !!!! Plenty of gain. Run the mic gain around 10 o'clock position. 73, Dave, K2DP St.; /archives//html/TenTec/2002-07/msg00166.html (6,571 bytes)
4. Fw: [TenTec] INRAD 2100hz Filter in Omni VI Plus (score: 1): Author: DAVEK2DP@aol.com (DAVEK2DP@aol.com); Date: Fri, 25 Jan 2002 00:12:17 EST; Dave and Brian, When you talk about wanting to take the "edge" off of the ssb signals on receive on the OMNI 6+, I am presuming that you want to knock off some of the high frequency noise. I would su; /archives//html/TenTec/2002-01/msg00380.html (7,405 bytes)
5. [TenTec] 1208 Transverter / 6m Operation (score: 1): Author: DAVEK2DP@aol.com (DAVEK2DP@aol.com); Date: Sat, 29 Dec 2001 02:02:58 EST; Mark, I have two 1208 transverters and both seem to hear extremely well when used with my OMNI 6+ xcvr, However, my antenna is tuned for 6 mtrs and is a 5 element 6 meter beam at 45 feet. I would sug; /archives//html/TenTec/2001-12/msg00255.html (7,598 bytes)
6. [TenTec] OMNI 6 - Is My Wide Filter *Too* Wide? (score: 1): Author: DAVEK2DP@aol.com (DAVEK2DP@aol.com); Date: Wed, 11 Jul 2001 00:14:26 EDT; Al and all, I have recently been through the same problem with my OMNI 6+ and the INRAD 2.8khz filters. I had installed both 2.8KHZ INRAD filters in my OMNI last year and they were working well until; /archives//html/TenTec/2001-07/msg00066.html (9,524 bytes)
7. [TenTec] RF in audio (score: 1): Author: DAVEK2DP@aol.com (DAVEK2DP@aol.com); Date: Thu, 8 Mar 2001 00:08:00 EST; Suggestion is to wrap the mike cord 10-12 times through either FT-77 (preferable) or FT-43 toroid donut cores with 1 inch ID's (see Amidon for the cores). Place the toroid as close to the mic input (; /archives//html/TenTec/2001-03/msg00099.html (8,343 bytes)
8. [TenTec] Omni 6 info - internal keyer speeding up during sending (score: 1): Author: DAVEK2DP@aol.com (DAVEK2DP@aol.com); Date: Mon, 26 Feb 2001 22:57:45 EST; Gents, I had the same problem with my straight OMNI 6. TT sent me a new ROM chip and that did not solve the problem either. However, when I sent the unit back to the factory for the Option 3 full upg; /archives//html/TenTec/2001-02/msg00260.html (6,939 bytes)
9. [TenTec] Keyer problem? (score: 1): Author: DAVEK2DP@aol.com (DAVEK2DP@aol.com); Date: Sat, 6 Jan 2001 23:35:55 EST; Tom, I had the same exact problem with my OMNI 6 when I first got it 2 years ago. Ten Tec sent me a new firmware chip and also advised me on the cap mod, which was already in my unit. The problem was; /archives//html/TenTec/2001-01/msg00139.html (7,038 bytes)

Current List: 1 - 9
Page: [1]