- 1. [RTTY] Startech USB COM port adapter (score: 1)
- Author: William K Carr III <k5tu@att.net>
- Date: Fri, 02 Sep 2016 14:22:57 -0500
- I have a Startech ICUSB2324X USB to 4 COM port adapter that I want to use with N1MM+ and the MMTTY engine to key FSK and PTT through the W1AN interface that plugs into the DB15 connector on my K3S. T
- /archives//html/RTTY/2016-09/msg00001.html (7,897 bytes)
- 2. Re: [RTTY] Startech USB COM port adapter (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Fri, 2 Sep 2016 19:33:55 -0400
- Now here's the weird part. I configured MMTTY and the K3S to use the USB sound interface built into the K3S, and that works fine with AFSK. I left the serial cable connected. However, when I transmit
- /archives//html/RTTY/2016-09/msg00003.html (9,555 bytes)
- 3. Re: [RTTY] Startech USB COM port adapter (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Fri, 2 Sep 2016 22:36:34 -0400
- The StarTech ICUSB2324X uses the TI TUSB3410 chipset. The TUSB3410 datasheet <http://www.ti.com/product/TUSB3410/datasheet> indicates support for data rates 50 BPS to 921.6 kbps. It will not work wit
- /archives//html/RTTY/2016-09/msg00004.html (8,645 bytes)
- 4. Re: [RTTY] Startech USB COM port adapter (score: 1)
- Author: Scott Schultz <schultz0530@gmail.com>
- Date: Sat, 3 Sep 2016 06:20:05 -0500
- I have to start out by saying that I am not familiar with that Startech box, but if you are using a desktop, you may want to consider installing a serial card. When computers stopped coming with seri
- /archives//html/RTTY/2016-09/msg00005.html (9,777 bytes)
- 5. Re: [RTTY] Startech USB COM port adapter (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Sat, 3 Sep 2016 08:30:58 -0400
- (NOTE: FSK RTTY with this hardware combination does *NOT* work with DM780!) The other serial port does work with CW on N1MM+, CWType and even DM780. DM780 is "brain dead" when it comes to FSK in that
- /archives//html/RTTY/2016-09/msg00006.html (10,807 bytes)
- 6. Re: [RTTY] Startech USB COM port adapter (score: 1)
- Author: Alex <alex@kr1st.com>
- Date: Sat, 03 Sep 2016 13:25:48 -0400
- I don't have any experience with that particular adapter. Until now I've always used a 4 port UART board in the desktop as someone described earlier. However, I'm considering getting rid of the deskt
- /archives//html/RTTY/2016-09/msg00007.html (10,891 bytes)
- 7. Re: [RTTY] Startech USB COM port adapter (score: 1)
- Author: "Jim Hargrave" <w5ifp@gvtc.com>
- Date: Sat, 3 Sep 2016 22:37:19 -0500
- Kim, This sounds like a configuration problem and not hardware. Do you have the radio on Com 5, and also trying to configure Com 5 for FSK/PTT? If I'm correct, then MMTTY can't open the port because
- /archives//html/RTTY/2016-09/msg00010.html (10,761 bytes)
- 8. Re: [RTTY] Startech USB COM port adapter (score: 1)
- Author: Scott Schultz <schultz0530@gmail.com>
- Date: Sun, 4 Sep 2016 05:56:00 -0500
- From N0IU: (NOTE: FSK RTTY with this hardware combination does *NOT* work with DM780!) The other serial port does work with CW on N1MM+, CWType and even DM780. From W4TV: ...and configure DM780 to ha
- /archives//html/RTTY/2016-09/msg00011.html (9,362 bytes)
This search system is powered by
Namazu