I see that now that I read the poorly written rules several times. I stand corrected. Thanks Paul 73 Jim W7RY _______________________________________________ RTTY mailing list RTTY@contesting.com htt
That would be my guess. They're probably using their new Icom rig that does contest serial numbers and has other rtty memories. They just hit the key to send their call and the report. 73 Jim W7RY __
Good deal Mike... No worries for me! I guess it was too much trouble for Elecraft to put a keyboard jack on the K3? 73 Jim W7RY _______________________________________________ RTTY mailing list RTTY@
Looking at her QRZ page, she seems to think quite highly of herself. I'll be at Dayton but probably won't attend. 73 Jim W7RY _______________________________________________ RTTY mailing list RTTY@co
That sounds like something I would say Bill! :) 73 Jim W7RY _______________________________________________ RTTY mailing list RTTY@contesting.com http://lists.contesting.com/mailman/listinfo/rtty
A 756 PRO I or II would be a better choice for around the same money. 73 Jim W7RY _______________________________________________ RTTY mailing list RTTY@contesting.com http://lists.contesting.com/mai
It's going to a good home! 73 Jim W7RY _______________________________________________ RTTY mailing list RTTY@contesting.com http://lists.contesting.com/mailman/listinfo/rtty
That is Icom's standard response when they don't feel like covering something under warrantee. They tried to tell me that on a NEW IC-7200 that was dead out of the box and had never been on an antenn
Good find Don! I would say that's what the Radio Shack item is: http://www.bcae1.com/glisoltr.htm Doing some searches, looks like that's the major type of construction for them. 73 Jim W7RY _________
Yes. But getting Icom to put it in is going to be a big job! 73 Jim W7RY _______________________________________________ RTTY mailing list RTTY@contesting.com http://lists.contesting.com/mailman/list
If you would like Icom to incorporate the clear RIT command into their modern software upgradable radios, please send a respectful email to this link: http://www.icomamerica.com/en/contactusform.aspx
Agreed! The Edgeport boxes even work with FSK @ 45 baud. 73 Jim W7RY _______________________________________________ RTTY mailing list RTTY@contesting.com http://lists.contesting.com/mailman/listinfo
This is what I ordered for my new Dell desktop. Works great for FSK (45.5 baud 5 bit) as well as PTT and CW. Syba SD-PCI15029 8 Serial (RS-232) MultiPort PCI-Bus Card with 25-pin Octopus Cable Ordere
Be careful deleting n1mmlogger.ini! You will loose all of your settings, window locations, fonts the whole shebang!!!! 73 Jim W7RY Might want to post on the N1MM reflector. Make sure you have the new
I sometimes feel like PSK operators are in their own little world. They stick to that watering hole around 070 and don't venture outside of it. I concur! And their insistence to only run 50 watts. 73
250 Hz bandwidth for the 455 KHz IF. I think it comes stock with a 500 Hz 8 MHz IF filter? If not, a 250 for the 8 MHz would be a must for both CW and RTTY. 73 Jim W7RY I have bought back my 850 to u
Has anyone successfully run RTTY from a remote station? What did you use for software on each end? Has anyone used the Remoterig controllers to do this? Thanks! 73 Jim W7RY __________________________
if you are using the mic jack, you need to have the rig in LSB not RTTY. RTTY mode requires you to use FSK, which is more desirable. There are lots of FSK circuits on the net. Here is one of them: ht
Take too long to complete the exchange, with me, and I will "move on". If I called you, you missed a contact, and won't get another chance. If I'm calling, and you answer me: "take too long, and you
I'll second that... Shelby has it nailed.. I have a rythym for S&P.. and if you break it.. I'll be patient... up to a point...cross that line.. and I'm outta there... the line moves too.. depending o