Yeah, TO4T is FG. To fix this, you have to edit the COUNTRY.DAT file, then run the NA Utility Program (NAU.EXE) to crunch down the data into new CQ.CTY and DXCC.CTY files. Takes five minutes. We saw
Ed, et al, This doesn't surprise me at all, and it shouldn't surprise anyone who tries to run DOS apps under Windows. Way back at WRTC 1996, we discovered that the brand new (for then) TI 5200 laptop
Hal, The .LOG file generated from any NA version after about 10.42 is a Cabrillo file; before that it was the old ARRL .LOG format. When N5KO was gathering input concerning Cabrillo, I argued for a n
Darrel, I'll bet you have a BIOS address problem. NA can't find any COM or LPT port which is set for "PnP" in the BIOS setup. While a W9XT card is not PnP capable, any other PnP ports might throw off
Tom, The Cabrillo file format is pretty simple. Each QSO line starts with the"QSO:" identifier, followed by the frequency and mode, date and time, then your call and sent information and finally the
It is an ARRL requirement that the Cabrillo log contain your ARRL section information in a separate field. In a contest such as SS, your location is your section. However, in ARRL 10, for example, yo
Chris, ASCII files will not work as a .DTA database. If I changed NA so that it would (a monumental task), expect a response time of about 30 seconds between keystrokes. Shoot a note to Tim, K9TM at
Dick, When I've encountered these kinds of problems, one of the solutions is in the computer's BIOS. If you check the BIOS when the computer boots, I'll bet you'll find that the BIOS is set such that
Dan, K9TM has complained profusely about this same problem. However, I have never been able to duplicate it. We used CQ repeat a lot this weekend on VHF (no surprise there) and I was able to adjust t
Jeff, The most straightforward thing to do is to change any QSOs you want to remove to your own callsign. Then start up the NA Utility Program (NAU.EXE) and use the remove QSO function which allows y
07 JUNE 2001 NEW NA RELEASE 10.54 NOW AVAILABLE A new version of the NA contest logging program is now available from the Radio Bookstore or the new DATOM Engineering web site at http://www.datomonli
NA Users: Tim, K9TM called me tonite to report that there are some significant bugs in the "Restart CQ After Alternate Sending" when used for SO2R on phone. NA 10.53 added some hardware to the SO2R i
Bob, When you exit NA, you have the choices to "exit the program", "print files" or "write files to disk". If you choose "write files to disk" all of the logs, dupe, summary, etc. are printed. Includ
Steve, First of all, NOTHING that you do in Windows "i.e., in My Computer" will affect NA. NA is not a Windows program, so it does not get any of its port information from Windows. You are correct in
K3MM, G3SQX, et al: Tim, K9TM bought a USB box with four COM ports. He had a heckuva time making it work, and the manufacturer was of little or no help. Eventually he got it running in Win98 and it w
To the best of my knowledge, there is no "official" format for the split data in a spot coming from a cluster. Without a standard format, it is difficult (if not impossible) to parse out the data rel
Jim, I have one of the W1GEE interfaces, which are functionally equivalent to the MFJs. I have used the W1GEE with NA and my FT-1000D in the past with no problems...well, at least until lightning wha