I just ended up placing an RG1000 with a SR-4200 on it and it works fine. Im not sure where the info came from that you could do that with 2 single SOHOs but it doesnt work unless you do use some NAT
Well just deploy outdoor RG solutions and dont worry about it... ;-) With all the support issues it is easier to just use RG's. Nate Bill, I have had this exact problem from day one. I still haven't
I have seen this as well. We have been testing Lucent Silver, Tony's 100mW, & Microtik 200mW. And have only had good results with the 200mW radios. Nate We have been testing Orinoco (gold and silver)
We have seen this problem as well. But we are using 200mW Microtik cards. It seems that we have better luck with the cards if there is one on each side of the link. On the backhauls anyway. We have a
I have had this problem since day one with the Flashrom units and the 100mW radios.... When I reboot the radio like 10 times it will hang about ever other reboot. Or at least 2-3 times during the goo
I installed 3 of the Mikrotik... did I spell that right?? ;-) But it is a flashrom setup. We have a AP-1000 I will have to give it a try in there... But we saw big improvements on links that are over
We saw this today as well on one of our sectors. I adjusted the sector a little and all is well now. The farthest one on that sector is at about 11 miles out. We have seen those strange readings as w
I was told they would work with the flashrom units but I have yet to get one to work with multiple flashrom units.. I have about 17 flashrom units out in the field and I tried the 100mW radios in jus
Thats the first I have heard that... So it is Karlnets fault I guess.... ;-) I am building another flashrom unit tomorrow.. I will test your theory then.... I kinda doubt it will pass the 10 reboot t
We installed a 100mW radio in an RG with an omni and testing it with TC. And the readings just jumped all over the place.. Changed it out with a 200mW and the readings where stable... So your saying
Barry, Have you tried to use any 100mW radios from Demarc in a flashrom yet? Just curious what your results are on a 10 reboot test... Reboot the flashrom unit 10 times and see if it locks up.... Jus
Nothing special my friend. If it fails... Ya fix it... Check out what wave wireless does on there units..... Less then most of use do and they sell there units to other people... Im just using mine f
What are you measuring your results with? Im just curious. I have just been using the Wireless link test in the configurator and it makes a huge difference on our links. But from what Tony says the c
Are you using an RG? What is the setup like? But to give you an easy answer.... Yes... ;-) Nate Karlnet gurus. If I assign the CPE with a public IP can the end user do a NAT? Specifically they want t
Im not a guru though... ;-) Nate Karlnet gurus. If I assign the CPE with a public IP can the end user do a NAT? Specifically they want to run a FTP server on one of the 5 PCs. Thanks Chris wireless@p
What type of equipment are you using? Or are you asking what to get? You can send me an email offlist if you would like. nate@accesscc.com Nate The answer was easy enough Nate but the information pro
Ok yes you can do it. RG Setup...(Turbocell of course..) Uncheck Enable Bridging Check Enable Outgoing NAT Check Incoming NAT Enable DHCP (if you want....) Click OK on General Setup Go to Setup>Outgo
Has anyone got any stats on there network on how much equipment locks up or gets fried due to storms? Im located in tornado alley and storms this time of year happen all the time. I was just curious
We mainly use the Flashrom setups and usually they are located at teh top of the tower. And there isnt much room for an APC reboot device in the enclosure. And the Watchdog Reboot Timer hasnt seemed
We are looking into these devices. http://www.peregrinecontrols.com/ Im not sure about there smallest one though. It might be worth looking at it. Nate --Original Message-- From: karlnet-admin@WISPNo