Good deal ;) Sincerely Tony Morella Demarc Technology Group Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 email: tony@demarctech.com http://www.demarctech.com Open Chat Server http://www.
Roger Yep this still work you can get about 7Mb out of a setup like this. The only issue is the limit is still 64 or 128 users per BOX not per card. Also when you add a third card you may see some sl
Robert Try to re-flash the card and see if this helps. If not getting a new key should not be an issue. Sincerely Tony Morella Demarc Technology Group Office: 908-996-7995 Cell: 908-246-9170 Fax: 908
Only the Orinoco cards work with the PC driver and this does not include the Avaya or Entersys with out a firmware change. Sincerely Tony Morella Demarc Technology Group Office: 908-996-7995 Cell: 90
Brian We started doing 3 port solutions and found that as soon as you added the third port the throughput dropped by 1/2 on the last port this was with the latest version. With two ports it works gre
Hmm to date the only cards in 5Ghz are PC card-bus, which the AP-1000 and RG-1000 don't have :/ Sincerely Tony Morella Demarc Technology Group Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-020
Go here and at the bottom of the page is the MIB data for SNMP. http://www.demarctech.com/products/turbocell-download.html Sincerely Tony Morella Demarc Technology Group Office: 908-996-7995 Cell: 90
Norm FYI You have two 100mW cards and one 180mW card. The 180mW card does draw 20mA more then the 100mW. This should not be causing a problem but as you know the AP-1000 is picky about power. Also th
Norm Please keep us updated on the progress! Sincerely Tony Morella Demarc Technology Group Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 email: tony@demarctech.com http://www.demarctech.
Info I just sent to some else: 1. Install Configure: http://www.demarctech.com/products/turbocell/turbocell-download.html and run it 2. Hook up the AP-1000 and put into reload mode 3. In Configure: F
Nate A CPE unit in CLIENT mode will work like this. A PCMCIA card in a laptop for example also we have had luck with 802.11b CPE units doing routing. Sincerely Tony Morella Demarc Technology Group Of
Travis Ah this is a good point if you can find notch filters for each channel, 22Mhz wide each this would help to isolate antennas that are close to each other in side the 2.4Ghz band. Sincerely Tony
Reid You set the speed on the license-it.com website during the generation of the key. Sincerely Tony Morella Demarc Technology Group Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 email:
Jim Version 4.02 does support classless routing. From a logistics stand point I would recommend starting at the CPEs first and work you way back making sure you have a default gateway for the CPE to
Would be interested in this data, what the performance increase is. Please keep us updated. Sincerely Tony Morella Demarc Technology Group Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 em
Norm If an AP would scale to 128 users per radio you would be ok, correct? Sincerely Tony Morella Demarc Technology Group Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 email: tony@demarct
Jim Per box or base station. Sorry about that was thinking of a single port AP when I wrote the email :) Sincerely Tony Morella Demarc Technology Group Office: 908-996-7995 Cell: 908-246-9170 Fax: 90
Nate Will the network be PtP with routers at each end? Or will this be one big bridge network? We would recommend routing, as the performance levels are much better as the network scales. Also depend