That is because it is a satellite in a P to P link. There is NO polling! When using the sr4100 as a PtP controller, you can't select "non-polling" w/ version v4.xx code, it just blanks that option Da
All, Working on FCC Certification now! Kevin Any updates on the outdoor units? Dan Metcalf Wireless Broadband Systems http://www.wbsysnet.com/ 781-577-2780 dan.metcalf@wbsysnet.com -- [This E-mail sc
All, Going through some old emails today and this one caught my eye. With the release of our new board the following pricing is a better comparison: WPRG+05 Board $150 PoE injector $25 Lucent PCMCIA
Dan, How many radios in the APs? Are there two APs or only one with two cards? Kevin I have a link like this 1 2 3 4 Rg1000--ap1000--ap1000--rg1000 Both ap's are running isp base station, but when go
Dan, So to clarify you have a setup that looks like this: RG1000 --(Wireless Link)--AP1000--ETHERNET--AP1000--(Wireless Link)--RG1000 Is that correct? Are their any other devices in between the two A
Dan, I am going to have Tech Support call you. If you do not hear from them please let me know! You obviously have tried all the simple solutions! Kevin Actually its like this Link)--AP1000--!wireles
Karlnet has stated before we will have a driver for a "WET11" type device. I believe this is due in the next 4 weeks. I caution you that it may not work on the WET11, but a comparably priced unit bas
Dan, You have to have our Client Manager installed (you can download that from Lcense-it or Karlnet.com). Then you create a new profile. Kevin ____________________________________ Kevin R. Knuth Busi
Bob, We have posted this information before, but am glad to do it again! Attached is the spec sheet (hope this list allows attachments. The full version board lists for $185 and the lower cost versio
We support the Prism 2.5, and Agere cards. We will support 5Ghz cards as they become available. We are working with Atheros and Intersil as they move towards combo "g and a" radios. Kevin What cards
Boards start coming in this week! Kevin yes...it will have support for Prism cards - no more worries about overdrawing the RGs (in terms of power) in terms of 5.x support, yes cardbus is supported...
The 1 port board has ONE radio slot and ONE Ethernet The 2 port board has TWO radio slots and TWO Ethernets When you say 2 port board....is that 2 Ethernet or 2 PCMCIA ports? weren't ________________
Radio value is hard for me to determine! the other question was already answered. And how many cards? I notice the spec states PCMCIA / CARDBUS socket(s). One of each? What's the best value radio to
I would say March-April. so how soon until we see the "all-in-one" cpe/antenna combo's? -bob _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wi
That price was for the REALLY LOW COST solution. That has NOT been released yet!! --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Bill Fish
The isssue here is this: The new WPRG board we are releasing is intended to be a ONE RADIO BASE STATION. We also have a two radio version. We have repeatedly reported on this list that we will have a
I believe that you will see "A" and "G" Combo radios available in July or so. Karlnet should have support as they are released. Kevin ____________________________________ Kevin R. Knuth Business Deve
Travis, I just checked and I got in! Kevin --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Travis Brown Sent: Monday, January 27, 2003 11:2
We still ship the driver! It lists for $55. We are releasing our own two radio board this week, and with our software on it you may be able to meet all of your requirements and not use Linux. List pr
Before my last post I called our Senior test engineer at home to confirm that fact. The answer is "Yes" Kevin Hi Kevin, Does the satellite software support a KN client on one radio, and a 802.11b AP