Hey! I UNDERSTAND your frustration!! They really are on their way. Charles has units on their way to us, and we will have them reflashed and out the same day. Kevin Kevin, I only say it that way beca
All, This is really unofficial, which means I cannot back it up with proof. And it may not even be relevant. I have heard from SEVERAL of our customers that they seem to think that the later versions
I think that is in the next release for RG's. Not sure if it is possible with Ubicom yet. Kevin Kevin, Reggie? I have a feature request for the RG client software and ubicom stuff. I am asking this f
FYI- You can purchase OEM versions of the Agere card without the black plastic antenna. This reduces interference! Kevin Yes, the built in antenna on Orinoco cards receives alot of local signal from
Sure, The OEM version of the card DOES NOT have the little black plastic piece on it. What you will find are 2 antenna ports. It is important you use the correct port! The card can recieve signal fro
I am not going to try to start an argument on the list about Prism card issues, but Karlnet tests support the following: Intersil based cards have 5db less receive sensitivity than the Agere cards. S
Caleb, Our test data shows that the "published" numbers may not be accurate on many Prism cards on the market. I do not want to start an argument about this. If you like them better, feel free to use
Caleb, Simply put: If the manufacturer of the CARDS is not misleading you, then it works! Why is it that CISCO will tell you they are using the Intersil reference design, but fail to mention they cha
All, Chris is correct, the bandwidth is "backwards" for asymmetrical. The engineers are trying to redesign that to work better. This other issue, which appears to imply that the throttling does not w
Brett, The SEC allows you to pass multiple MAC addresses through an AP on an 802.11 standard network. The answers are: 1. You would have to replace all of your licenses. 2. 8 User version is $88 (lis
Brett, I have posted here before we are probably about 8 weeks away from having a SUB $300 CPE complete with antenna (19dBi flat panel) and PoE! Kevin --Original Message-- From: karlnet-bounces@WISPN
Andy, The UBICOM based device (RSU-ANT) will have the ability to do TurboCell and Bridging for 5 users. We are trying to get NAT to fit, but there is not much room for us to work with. You can upgrad
Brett, You will have to use a router if you only want to use one IP. ONE WARNING THOUGH- maximum throughput is around 4 mbps. Plenty fast enough for most WISP applications, but not as fast as our RG+
NO. This is a board based on the same chipset in a WET11. Our part numbers are KN-050- UBICOM based board (like the WET11) KN-100- Our RG+ Board with single radio slot (formerly called WPRG+05) KN-20
The only difference was software load. Our previous product manager was planning on bundling them at the point of sale. WPAP+ is 802.11 with AP Plus software loaded WPBASE is TurboCell Base Station.
If I remember correctly, the wireless link test data is accurate on AGERE cards! Intersil based cards do not have the necessary code to run the link test accurately. Kevin Interesting, I have one car
I did not know that! Thanks for the info! Hello, can you see me? Upgrade the prism cards to latest (1.4.9 or later) firmware and it'll show correct readings. Leszek __________________________________
That is because the firmware in the radio card does not report signal strength. That is a feature that is only available in the Agere cards and some versions of Intersil firmware. Kevin _____________
Ben, Please do report this ASAP to Tech Support at 614-822-0023 OR support@karlnet.com Kevin ____________________________________ Kevin R. Knuth Business Development Manager North America Corporate O