Hallo, i see, that PRISM based cards are still not working in AP mode... I am Could somebody to try AP2000 with proxim 8470wd b/g card? I readed, that card has power 85 mW (19 dBm) in 802.11b and 60
Thanks Bernardo, could someone confirm +2dB output power of b/g Kit for AP2000 from practical comparision with Orinoco classic gold? Peter _______________________________________________ Karlnet mail
Hallo Peter I tried with success Wafer 5826 http://www.icpamerica.com/wafer_5825.php It is SBC with fanless 300 MHz processor, Realtek 8139 NIC, 1 Cardbus slot. Price was abou $300. You need add 1 SO
Hi all, i have instance for Help File correction. For several years there is a bug in section "Radio support" 1. Radio 802.11b support Turbocell support -- Agere Orinoco Yes No Correct is Yes Yes of
Hallo Bruno, WPNTFIX.bin is renamed WPNT357.bin Why You need older 3.51 version? Latest is version 3.95 Peter _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.co
Hallo, my recomendation: 1. remove PCMCIA cards 2. forced reload 3. connect to WP-II with UTP (kernel 4.14 and 4.15 do es not work with BNC, i am not sure, if 4.4x is OK) 4. start latest Karlnet conf
Kbridge Compact Flash kernels knevotcn-xx.bin do es not support WEP for PRISM based cards and "Link integrity" feature (tested with Sv4200 Satellite and SV4305 ISP Base). I have feeling, that i am on
Thanks Eric, i think, that you are using Satellite with Lucent card, no ISP Base. I have trouble with lockups of my SV4305. It could be problem of HW. Peter __________________________________________
1) You are able to use WEP with Senao card? I was unsuccessful with Zcomax PRISM 2.5 card (security button in 802.11b interface configuration is not available) for SV4305 and for SV4200 too, while th
I have several new questions: 1. Is possible to use KN50 like "true" 802.11b client for standard AP (not AP+)? 2. If yes, is possible to specify which MAC address will be bridged from ethernet to wir
I noticed packet loss even with ping from ethernet side to Ethernet convertor. EC is very weak device. What amount of traffic you have? Have You any troubles with windows NDIS driver connected to thi
Hallo Gerhard, first - i never used Dlink. You are able to ping AP1000 with Karlnet 4.44 loaded from PC connected to ethernet side of DWL-810+. If yes, and DWL-810+ is in bridge mode, then: 1. You ne
I noticed very big "noise level" differences between several (Lucent, Orinoco, Avaya) PCMCIA cards. I made tests in Client Mode under Linux and Windows. Under Linux OS i used orinoco_cs driver and wl
I am curious, if WDS support is planed in near future or not. Peter _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listi
Hallo Mehdi, software is I do not know, if You have Turbocell loaded in 2 AP1000 devices, or You are using only one device in AP mode and second point of link is Linux client in managed mode. ACK pac
Hallo There are no ACK packets in Turbocell. Distance limit is question for somebody from karlnet. Because turbocell is proprietary it is undocumented. You have 2 port "Lucent bridge" loaded with kar
Hallo all! In Orinoco APs, there is parameter "Distance between APs" (Large, Medium, Small, Minicell, Microcell). This value influences Modem Thresholds (EnergyDetectThreshlod, CarierDetectThreshold