Kevin told us (several months ago), that upgrade from orinoco firmware (COR, ROR) to Karlnet Base and Satellite will be soon. I will be glad, if there will be upgrade for classic AP too (AP500, AP100
Routerboard 230 kit seems interesting. We still have not HCL for Turbocell... But i know, that RTL8139 NICs are supported. So i am worry, that NIC (NSC DP83816 based) will be not compatible with Turb
Mark, you can set up PPTP or PPPoE access server for internet access. Another way is (may be) to install KN device at GW or before GW (if Your whole network is bridged) and use "MAC address radius au
I assume, that "blocking of ethernet multicast" at AP side is technical solution for option "deny inter-client traffic" at 802.11b interface. Peter Citcia Jon Loosle <web@s1i.net>:
Hi, Yesterday 12.8.2003 at about 17:30 GMT I hade strange trouble with several kbridge based devices (Orinoco, Karlnet) loaded with firmware 3.xx and 4.xy Devices are in different areas. Units were U
Hi Bruno, release 7.5 of AP software (spring 2002) is latest, so latest firmware for WP- II or AP1000 is WPNT395.bin. WPNTFIX.bin (renamed WPNT357.bin) is there because original firmware in older dev
I think, that Enterasys R2 hardware platform is like Orinoco AP2000 (motorola processor, VxWorks OS?). If I remember, Kevin told us, that Karlnet has unreleased firmware for AP2000. So i am sure, tha
Hello, there are little differences between same cards, but Hermes based Orinoco Silver and Gold cards are same. Only firmware is different. 802.11b - 85 mW. 802.11g - 60 mw. But there are no linux d
Hello, i think, that AP2000 802.11a upgrade kit (PCMCIA card + small 5GHz antenna connected with cable) will be easy hackable. But when will be this card supported by karlnet? Peter
Hello, Karlnet Turbocell driver is not included in Mikrotik. Mikrotik is custom linux based distro with custom kernel and modules. You can not compile module in another linux box and then use it with
I thinked, that this discusion will result to some explanation why 802.11b AP mode do es not work with PRISM2, 2.5, 3 cards and next to solution (recomended firmware of PCMCIA cards), but i was too n
I used Zcomax XI325H and Zcomax XI300 and Karlnet 4.31 (SR4x00 and SV4200) It works fine as long as I stay with Turbocell (satellite base station) mode. As soon as I configure 802.11b interface with
I noticed very big "noise level" differences between several (Lucent, Orinoco, Avaya) PCMCIA cards. I made tests in Client Mode under Linux and Windows. Under Linux OS i used orinoco_cs driver and wl
I am curious, if WDS support is planed in near future or not. Peter _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listi
Hallo Mehdi, software is I do not know, if You have Turbocell loaded in 2 AP1000 devices, or You are using only one device in AP mode and second point of link is Linux client in managed mode. ACK pac
Kbridge Compact Flash kernels knevotcn-xx.bin do es not support WEP for PRISM based cards and "Link integrity" feature (tested with Sv4200 Satellite and SV4305 ISP Base). I have feeling, that i am on
Thanks Eric, i think, that you are using Satellite with Lucent card, no ISP Base. I have trouble with lockups of my SV4305. It could be problem of HW. Peter __________________________________________