Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Wed, 21 May 2003 15:30:07 -0300
Hi there are you ppl doing this PoE (power over ethernet) or simply powering the RG1000 units with a higher Voltage? another related questions: - I got my hands on one AP1000 without the power suply.
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Tue, 27 May 2003 10:51:54 -0300
Hi there Does any of you know if the WPCPE and WPBASE boards from Karlnet comes with any kind of case? if not, what are you guys using to protect the board / install the board into? TIA, !3runo from
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Wed, 24 Dec 2003 10:25:01 -0200
Hello there I hope someone can enlight me in a few questions about KN-50 board: - does KN-50 can act as an 802.11b AP? or TC AP? - how much throughtput you can expect from a KN-50 client connected to
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Wed, 12 Nov 2003 11:13:59 -0300
Hello there did you upgraded config.exe to 4.44? Cheers !3runo from Brazil _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailma
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Wed, 12 Nov 2003 17:53:37 -0300
Hello there a friend of mine asked to check his WP-II-E, which I could sucessfully "revive" through a forced reload I can access it's ethernet, replace the firmware, etc, but no mather what I try, it
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Thu, 13 Nov 2003 16:53:13 -0300
Hello there thanks for the ppl that answered me privately with tips and recommendations I opened the unit, it doesn't seem to have any fried (or even HOT) chip (well, besides the AMD CPU -- uau, why
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Fri, 14 Nov 2003 14:58:35 -0300
does it do full routing like satelite does? _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Fri, 14 Nov 2003 16:36:28 -0300
Hello there as a software company, I think Karlnet could drop a bit the license prices for one slot gear (RG1000/AP500), to make them roughly equivalent to two slot gear (i.e. AP1000) this could incr
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Fri, 14 Nov 2003 17:33:49 -0300
Hi Kevin thanks for taking the time to answer my point is that, as AP-1000 have two slots, you can make TWO RORs (one on each slot). US$199/2=US$99.50 per ROR RG-1000 (and KN100) have one slot/card o
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Sun, 16 Nov 2003 09:02:00 -0300
so, what's the point on having the same price from the AP-1000 to RG-1000 karlnet firmware? as the RG-1000 (and other one slot gear) is lower priced than AP-1000 (and two slot gear), the software sho
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Sun, 16 Nov 2003 09:05:19 -0300
not couting the crippiling of features on RG1XXX BASE firmware (why pay US$350 to a BASE that will only run up to 8 clients while the AP1000 BASE -- with two potential cells -- will run up to 32/48/6
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Wed, 19 Nov 2003 10:08:05 -0300
Hello there I've heard one could use RADIUS to turn on the shaping feature of TC (i.e. a client having only 128Kbps download and 64Kbps upload) can any of you point me on instructions about this matt
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Wed, 19 Nov 2003 14:16:04 -0300
well, I don't know if it will work or not, but the info you shared was very interesting, at least :-) http://ecom1.thesupernet.com/info/downloads/TC%20Radius%20Authentication%20User%20documentation%2
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Thu, 20 Nov 2003 10:20:34 -0300
Hello there I'm trying to help a friend install a karlnet satelite license on a WP-II for some reason, the unit locks up after installing the firmware (load kernel, import license key file, upload so
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Thu, 20 Nov 2003 11:06:34 -0300
hello there I'm not sure if I understand what you're suggesting but in all cases we do the following exit program (if previously loaded) load program (AP MANAGER or CONFIG.EXE) load kernel (then load
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Thu, 20 Nov 2003 23:03:26 -0300
Hi there. thanks for answering actually what I need is to put Satelite 4.31 to work on WP-II the problem between WPNTxx.BIN upload with Karlnet Configurator was just a side note :-) Cheers, !3runo __
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Tue, 25 Nov 2003 09:48:41 -0300
Hello there can any of you point me a cheap source of Agere 0202 (Orinoco OEM) cards? in US, I mean TIA, !3runo _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Tue, 02 Mar 2004 08:56:06 -0300
Hello there I got some to test with karlnet but the reverse MMCX connector pigtail I have here didn't plug well on the card can any of you point me where can I buy some pigtails for SMC2532W-B? (the
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Tue, 02 Mar 2004 12:38:12 -0300
Hi unfortunately SMC 2532W-B isn't listed there, and the others RP-MMCX I'm a bit afraid on trying (unless someone can state it works) because I already ordered a few and the connector (on the pccard
Author: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
Date: Wed, 12 Nov 2003 11:13:59 -0300
Hello there did you upgraded config.exe to 4.44? Cheers !3runo from Brazil _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailma