I have seen a problem where if a customer uses IE to browse they can't get out... but if they use My Computer and type in address it works. This isn't an isolated problem with 4.45 though. I use Hija
I have found that when in TC mode, the base station uses the firmware on the card. I.e. 1.07 But when in AP mode, the firmware shows as 1.03. I would naturally prefer to use an updated firmware, as I
Indeed it was a bummer that it won't read the Config on AP-1000's. Cor/Ror at 4.15 seem to work just fine. But my ap-1000s are at 3.75 still. Has anyone else noticed that the new 5.0 Configurator wil
Would I be jumping the gun by asking about when this product would be available? Is there a PCMCIA to MiniPCI adapter, so we could upgrade the current systems to atheros? Whats the ETA on the atheros
What about PTMP? The PTP stuff is available (complete kit), but the OEM pieces aren't available yet.. you will need the kn150 or kn250 to use the minipci cards [mailto:karlnet-bounces@WISPNotes.com]
Anyone used the SEC client mode available with 4.45 and have it work? Using a Prism card? Andy _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.
Are you using a Karlnet AP? Ah, I have a "g" radio slotted in the PCMCIA interface on my laptop, and regularly see 54 Mbps from the office AP... Norm I don't believe the PCMCIA bus can handle the thr
Will it work in a KN-200,100 device in TC mode? Also there aren't many "cardbus" 802.11g/802.11a radio's w/ external antenna connections ( although proxim has a 802.11g/802.11b w/ external lucent jac
I have usually been able to isolate these problems to customer PC's. Either a Virus or Trojan. Can you look at ip cache flo on a cisco router? Look for 1 k packets and a lot of them. Or just look at
You create direct routes for those net works on interface 4. So 174.18.4.1 and 5.1. All the clients and KN-50's point to their respective gateway, the 5.1 or 4.1. Then on the Ethernet interface of yo
Wahahhaaahaah ________________________________ Go to the casino tested _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/li
Great. We may just drop Karlnet altogether. Consistency matters. We just installed 13 Base units in 1 of our markets. In 2 months, we may find that we can't afford the CPE? We are already losing busi
I too get their crap. I think that people pull our email addresses off google, as this list doesn't hide the email addresses of the senders in the public digest, like other lists. Google your name, I
We just installed 13 TC base units! The hell we are going to drop them altogether. Plus, we have been having a good experience with the product for the most part. For higher quality links we go right
All, We are using the 1000 series Base unit. The system is configured such that you assign the BS ID, Freq, IP address, and config file and the unit will associate to the base and pull the rest of th
Indeed, it is second hand information at best. Although if I never have to go back to the site, and the customer can pull 8 meg of bandwidth, I don't mind running 2 cables. Ha - I heard that story ba
Why not purchase the same cards that Karlnet bundles with their KN-50? All you really need is a card with Agere chipset, right? We are from Argentina.. we have to deal principaly with our factor of m
What are we going to do about TC CPE? I am told that Karlnet/YDI/Terabeam group is discontinuing the KN-105 and KN-50 boards? We just invested alot of money into a Turbocell network. They are changin
Indeed.. I am hoping that what you say is true.. although no-one from Karlnet has chimed in, nor does tech support seem to know the official response. I had heard tell that the KN-150 board w/ softwa
Hilarious! So using a solid metal enclosure should not be an issue. Dan this during utilizing a (no from (wideband) slightly as _______________________________________________ Karlnet mailing list Ka