- 1. [Karlnet] TEST (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Fri, 16 Apr 2004 12:04:53 -0600
- TEST _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet
- /archives//html/Karlnet/2004-04/msg00675.html (6,684 bytes)
- 2. [Karlnet] Retransmits (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Tue, 20 Apr 2004 11:47:38 -0600
- Has anyone seen a problem where the signal strength is perfect on a link and TC station entries lists all messages at Excellent transmit rate and yet the station has retransmissions that equal the tr
- /archives//html/Karlnet/2004-04/msg00700.html (6,795 bytes)
- 3. RE: [Karlnet] Retransmits (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Tue, 20 Apr 2004 12:32:24 -0600
- Nope on KN-200 Base to KN-100 client with Demarc Prism cards, and latest Karlnet firmware Anyone have a word on when the new Karlnet firmware will be out that supports Prism Cards in AP mode? Has any
- /archives//html/Karlnet/2004-04/msg00702.html (8,186 bytes)
- 4. RE: [Karlnet] 802.11a (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Wed, 21 Apr 2004 15:21:36 -0600
- Indeed.. pretty goofy. Makes it pretty hard for us that have invested a lot of money into TC to continue with new products. Wow. That really limits where the Atheros/TC system is going to go, IMO. I'
- /archives//html/Karlnet/2004-04/msg00725.html (25,714 bytes)
- 5. RE: [Karlnet] Bridge and route on the same KN200 (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Tue, 27 Apr 2004 09:36:25 -0600
- Bridging and routing works.. except that if you have both enabled, then all TCP/IP is routed and all other protocols are bridged, AppleTalk.. etc. Sadly for TCP/IP it seems that it is per unit and no
- /archives//html/Karlnet/2004-04/msg00756.html (8,584 bytes)
- 6. RE: [Karlnet] 5 Minute Total Loss of Traffic on KN-205 (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Mon, 10 May 2004 10:44:02 -0600
- I don't run any Cor's or Ror's with anything other than firmware 4.15 which was distributed by Orinoco. But I have a Flashrom unit and KN-200's and 100's with 4.44.2whatever and haven't had any probl
- /archives//html/Karlnet/2004-05/msg00094.html (24,722 bytes)
- 7. RE: [Karlnet] any update on 802.11a/802.11g ? (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Wed, 12 May 2004 12:56:21 -0600
- Only those that submitted feedback forms? Huh? We ALL want to know the outcome. Please post to list if you would, as we all purchase your products and have interest in any problems that arise. Do we
- /archives//html/Karlnet/2004-05/msg00117.html (9,184 bytes)
- 8. RE: [Karlnet] any update on 802.11a/802.11g ? (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Thu, 13 May 2004 10:02:46 -0600
- Support, With the new BIN files.... (4.45?) I am understanding that there is support for radios on a bin by bin basis? So.. for example, I load a Prism2.5 4.45 bin on my KN-2xx board. Will the Agere-
- /archives//html/Karlnet/2004-05/msg00130.html (10,233 bytes)
- 9. RE: [Karlnet] YDI and Karlnet (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Fri, 14 May 2004 11:11:49 -0600
- Does this still mean that 4.45 is slated for release as planned? Let us hope that YDI will bring something good to the table. I'm assuming that they didn't acquire Karlnet in order to run it into the
- /archives//html/Karlnet/2004-05/msg00150.html (9,749 bytes)
- 10. RE: [Karlnet] V4.45 Released (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Mon, 17 May 2004 09:04:36 -0600
- Indeed. I was under the impression that there would be a different firmware for individual radios? (as there isn't enough room to embed the driver for each radio into the same code) Am I correct in t
- /archives//html/Karlnet/2004-05/msg00170.html (9,779 bytes)
- 11. RE: [Karlnet] V4.45 Released (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Mon, 17 May 2004 09:17:37 -0600
- "Known Issues: * Kernel files are now radio-specific. For example, one firmware image may have the necessary drivers for Hermes 1 and Prism 2.0/2.5-based radios, but a different firmware file is requ
- /archives//html/Karlnet/2004-05/msg00171.html (10,719 bytes)
- 12. RE: RE: [Karlnet] who wants CB3 TC client? (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Mon, 17 May 2004 10:37:45 -0600
- Aren't we all looking for a cheaper CPE solution? Cable Modems and ILEC DSL, really mean fewer customers able to stomach high equipment and installation prices from wireless. I would be for it! As lo
- /archives//html/Karlnet/2004-05/msg00176.html (7,524 bytes)
- 13. [Karlnet] FW: Configuration Software Inquiry (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Mon, 17 May 2004 12:04:45 -0600
- So.. will there be a future release that will support mixed radio(chipset) mode, as they have in the past? Am I to understand that uploading the wrong bin/radio firmware will render the unit inaccess
- /archives//html/Karlnet/2004-05/msg00177.html (13,029 bytes)
- 14. RE: [Karlnet] Going to upgrade to 4.45 right away,wennie roast to follow. (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Wed, 19 May 2004 14:49:43 -0600
- I, as well had little problems upgrading, (after using the correct Configurator).. I think I upgraded my flashrom unit with old Configurator, and it lost all the settings for the wireless interfaces,
- /archives//html/Karlnet/2004-05/msg00241.html (9,165 bytes)
- 15. RE: [Karlnet] Amps (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Thu, 20 May 2004 11:09:39 -0600
- I agree... if you absolutely have to use amps... (would try to avoid at all cost) then YDI hasn't done me wrong in 4 years. After using a spectrum analyzer near a Hyperlink amp, I would say that they
- /archives//html/Karlnet/2004-05/msg00247.html (8,988 bytes)
- 16. RE: [Karlnet] setting TC client bw w/ in AP, kn50's no longer work (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Thu, 20 May 2004 11:12:13 -0600
- The KN-50's should require the MAC authentication to be the Ethernet MAC address on the KN-50 and not the wireless card's MAC. Although KN-100's we use the MAC of the wireless card for TC throttling.
- /archives//html/Karlnet/2004-05/msg00248.html (7,737 bytes)
- 17. RE: [Karlnet] Amps (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Thu, 20 May 2004 14:35:36 -0600
- Indeed, although they look similar, I think the YDI amp is better quality. Amps are most useful when you have long cable runs. And it should be right next to the antenna. Although 7/8" or greater hel
- /archives//html/Karlnet/2004-05/msg00255.html (12,479 bytes)
- 18. RE: [Karlnet] setting TC client bw w/ in AP, kn50's no longer work (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Thu, 20 May 2004 14:37:07 -0600
- --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Dan Metcalf Sent: Thursday, May 20, 2004 2:34 PM To: 'Karlnet Mailing List' Subject: RE: [
- /archives//html/Karlnet/2004-05/msg00256.html (10,510 bytes)
- 19. RE: [Karlnet] Re: Amps (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Thu, 20 May 2004 14:38:19 -0600
- I agree as well.. they all have their problems. Going forward, we are only using high powered cards in all newly deployed systems. I'd have to disagree. I have a bunch of YDI amps that have given me
- /archives//html/Karlnet/2004-05/msg00257.html (8,960 bytes)
- 20. RE: [Karlnet] Re: Amps (score: 1)
- Author: "Andy Henckel" <ahenckel@transaria.com>
- Date: Thu, 20 May 2004 14:47:02 -0600
- Others in my company also feel that putting radio's 100-120 feet in the air is also a bad idea because of the summer environment and ease of troubleshooting in the winter months. If they already have
- /archives//html/Karlnet/2004-05/msg00260.html (10,231 bytes)
This search system is powered by
Namazu