Scott, This can be done remotely. Please see the KarlNet knowledgebase for more information or contact KarlNet technical support for specific instructions. KarlNet Technical Support http://www.karlne
Hello all, It has come to my attention that one should upgrade to 4.44-xx from versions prior to 4.44 before loading 4.45. This is explained in the Kernel release notes for version 4.45 under known i
Hello all, I need to post a correction based on my own misunderstanding of the situation, if one is having issues upgrading to v.4.45. Please upgrade to version 4.44-xx prior to upgrading to v. 4.45,
Please see: http://www.karlnet.com/Support/SupportKnowledgeBase.htm Do you have a list of supported hardwares by karlnet software? Thanks Zsolt Fejr _______________________________________________ Ka
Phil, The Hermes I and Intersil builds are combined, Hermes II is separate. KarlNet Technical Support http://www.karlnet.com/Support/SupportKnowledgeBase.htm 614-822-5275 Thanks for the info. Can you
This is a response from our Lead Engineer on the subject: "The Australian CERT advisory identifies one of a category of denial of service attacks that are an unfortunate side-effect of using a shared
All, the following upgrades are in effect for the Lucent/Orinoco and AVAYA ROR and COR products. These upgrades are available from KarlNet OEM's and resellers: For ROR (AP1000) products : purchase SA
Yes, Check out the knowledge base and perform a text search on "convention" as in bin file naming convention. It will explain the structure of the bin file names. As far as Hermes II is concerned, th
Chris, That is correct, there would be a cost to have the Hermes II support. I suggest only doing this on new units as there is currently no 'upgrade' path from Hermes I to II. KarlNet Technical Supp
Eric, You are correct this is receive diversity only, there is no transmit capability on the other connetor, thus it does not impact poower out. KarlNet Technical Support http://www.karlnet.com/Suppo
Alex, Did you by any chance upgrade to the newer 5.00-01 of the Configurator? That would explain it. KarlNet Technical Support http://www.karlnet.com/Support/SupportKnowledgeBase.htm 614-822-5275 Wah
Brett, Typically this is used in long distance links, 30 + miles. There are many other things to consider first. Contact KarlNet technical Services off list for further assistance. KarlNet Technical
Hello all, It appears the downloads page link was not updated when the 5.00-01 release of the Configurator was posted to the website. This issue should be addressed soon. For now use the link in the
Ok guys, I work for YDI/KarlNet and this is the first that I have heard of these issues. I promise to inform you if the products are to be discontinued OR a price increase. If a vendor is telling you
The default username/password can be admin/public or karlnet/public. Please let use know your results..... Hello, Last we knew, default username and password for KN-50 was admin/public. Seems it has
Dan, This version only applies to builds that are loaded on a compact flash. (sv-xxxx) KarlNet Technical Support http://www.karlnet.com/Support/SupportKnowledgeBase.htm 614-822-5275 --Original Messag
Brett, 1.10-01-022418 is the latest released version. The KN-50 when originally released came with some version of 1.00. This version only supported Hermes I/Intersil chipset radios. Thus if one has
Bruno, At this point upgrade the unit to 4.44-01 and use it until the release of version 4.46. KarlNet Technical Support http://www.karlnet.com/Support/SupportKnowledgeBase.htm 614-822-5275 --Origina
Blair, The AP-200 is not an RG-1x00 board, as, I believe it has dual Ethernet ports. This was one of the first post KarlNet product offerings from Lucent and no binary is available for this hardware.
Mark, The KN-50 has a software load for 802.11b it is the Ultra bridge software. The software is as follows: KNUB-3600-01 Hermes I radio KNUB-3600-02 Hermes II radio KNUB-3600-03 Prism radio Terabeam