ok, well I found the setup for this, but it doesn't seem to work I'm looking over the firewall setup on the karlnet v4.02, and I'm wondering how I can block SPECIFIC ports (135-139, 5000) and allow e
On our ap running Karlnet/turbocell I have noticed that bytes in/out listed on our 802.11b (on the ap) are at 1,752,070,400 & 1,200,917,000, this is after 4 days. But our Ethernet (t1 connection) is
My results were not the same Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirelessbroadbandsystems.com We have been testing Orinoco (gold and silver) cards with 10
No, we own the equipment, its part of our MANAGED network plan. We monitor the link and the bandwidth for each device. The customer is happier that they don't have to program anything or deal with an
Bill, Yes we do offer a 768k/128k service for the residential market, and yes I do use Karlnet to control bandwidth, I set the bandwidth on the wireless side to 128k and 768k on the Ethernet side. On
Bill, We set the wireless side to 128k because that LIMITS how much data the CPE can move onto the wireless network, (uploading in this case as the data is coming from the CPE), and then we limit the
No we hard code the settings Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirelessbroadbandsystems.com is side ethernet ___________________________________________
Its actually just the TX rate on the interface Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirelessbroadbandsystems.com So I thought that when you set the limit o
I just setup a cpe running Karlnet v4.02 and a 100mw card, the user is able to access the internet and the speeds are great. However, there are two issue's, I can't ping/manage the unit from my home
Here is a picture from the AP doing a wireless link test http://wirelessbroadbandsystems.hypermart.net/100mw.htm Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirel
What version of karlnet Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirelessbroadbandsystems.com Dan, I've tried this and I'm seeing some strange stuff. Like it a
Norm You should take a linux type box and use it for bandwidth control I have scripts available that will do that. Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wir
Norm, I guess I should mention the LINK WORKS 100%, no problems with through put quality, HOWEVER I CAN'T ping the cpe from my home network. Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysne
I can ping the cpe from my NOC, if I telnet into my core router, I can ping the CPE Are there any limitations with bridging in version 4.02? Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysne
C:\Documents and Settings\Dan>arp -a Interface: 192.168.1.9 -- 0x2 Internet Address Physical Address Type 192.168.1.233 00-60-1d-1f-bc-cc dynamic I see it listed in my arp table on my pc Dan Metcalf
Was the card working ? was the link stable, it appears that this link is 100% solid Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirelessbroadbandsystems.com Check
I just did a ping fill test and its receiving 3.5 to 4.5 Mbps so there is something wrong in how Karlnet is seeing the signals I think Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com
Strange, very strange, its only a 1.5mile link, and its LOS and all the connections are good, everything is good Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirel
Ok more testing, - 1 thing to mention is that in every case of this, the unit w/ the 100mw card is Karlnet v4.02 and the other unit (ap or cpe) is version 3.79 or 3.88 Put a 100mw card into AP runnin
I wonder why for some people its NOT a problem Dan Metcalf Wireless Broadband Systems dan.metcalf@wbsysnet.com 781-658-2075 www.wirelessbroadbandsystems.com I believe that Tony spoke of this a couple